Diesel fire pump is mainly used for fire fighting and water supply in various places such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textile and other industrial and mining enterprises, because the drive power of diesel fire pump and electric pump drive power Different, so their routine maintenance and management are also many differences. The following is about diesel fire pump maintenance and repair methods. Diesel fire pump maintenance and repair 1, Diesel fire pump proper maintenance, especially preventive maintenance, is the easiest and most economical maintenance, it is to extend the service life and reduce the cost of the key. Routine Maintenance Check the amount of fuel in the fuel tank as follows - observe the amount of oil in the fuel tank and add as needed. 2, check the oil pan oil plane: Observe whether the oil level on the oil ruler engraved mark, less than the required amount should be added, but can not exceed the upper limit of the scale ruler. 3, check the fuel pump governor oil plane: If you do not meet the provisions of the engraved mark, should add sufficient oil (some pump governor no ruler, you can save this step). 4, check the pump oiling point for adequate lubrication grease: the diesel cycle pump on the nozzle removed, observe the inside of the grease is sufficient, such as inadequate, the application of grease gun into the inside of adequate lubrication. 5, check the water tank is sufficient: Found in the water tank should be replenished in time, add water should be clean fresh water, such as tap water or clean water. If the direct use of groundwater, easy to form scale in the tank, affecting the cooling effect caused by failure, therefore, groundwater softened before use. In the north (ambient temperatures below zero), a suitable freezing point must be configured for the antifreeze according to the local minimum temperature. 6, check the fuel pump drive connection plate: Check the connection screw is loose, if loose, should be re-calibration injection advance angle, and tighten the connection screw. 7, clean diesel engine and ancillary equipment appearance: with a dry cloth or dipped in diesel oil cloth æ© go to the body, turbocharger, cylinder head cover, air filter and other surface oil, water and dust; Compressed air blowing clean charge generator, radiator, fan and other surfaces of the dust. Extended reading: Top ten brands of motor China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (service Hotline:)
Measure tape is a measuring Tool which is commonly used in our daily life, when building, decorating and making wooden furniture, we often use steel tape measures. In fact, besides steel tape measure, there are also other types of tape measures, such as fiberglass tape measure, laser tape measure and ground fiber tape measure.
Measure Tape,Tape Measure Flexible Rule,Digital Tape Measure,Steel Tape
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com