1, solid wood office furniture
Solid wood office furniture is mostly desk office chairs, etc., when cleaning, you should be clean, St. Ao reminds you to place and move more attention. Avoid sharp scratches when cleaning. Do not use wire brushes or hard brushes for stubborn stains. Use a soft rag to remove strong detergents. When placing it, be careful to avoid direct sunlight as it will quickly oxidize the paint on its surface. Also, be careful when moving to avoid damaging the painted surface.2, leather office furniture Leather office furniture is used in the high-level leadership office to highlight the company's taste, it has good softness and color, it is easy to damage if it is not well maintained. In maintenance, you need to pay more attention to both placement and cleaning. When placed, as with wooden office furniture, direct sunlight should be avoided. When cleaning, it should be wiped with a soft dry cloth after wiping a small amount of water with a fine velvet cloth. For stubborn stains, it is best to use a professional cleaning agent.
3, cloth office furniture Many companies in the reception room will be equipped with certain fabric furniture, so that the received customers have a sense of closeness. The fabrics used in these fabrics are mostly soft and comfortable types, which are easy to be dirty and damaged, and need to pay special attention to their cleaning problems during maintenance. For products made of dust-proof, anti-fouling imported fabric, it can be cleaned by wiping with a clean wet towel. For those products that are particularly dirty and fragile, it is best to send them to a professional cleaning shop to prevent deformation and prolong their service life.
4, electroplating and sandblasted glass office furniture
The office furniture of electroplating and sandblasting glass is mostly the coffee table, seat and other products in the staff lounge. The surface of these office furniture is bright, and it is easy to see the stain of the masturbation and affect the appearance of the coating on the surface of the product. However, the maintenance of such products is much simpler than the above three categories. In normal times, you only need to avoid placing it in a more sleepy environment; when cleaning, you only need to wipe it gently with a dry cloth to make it shine. However, Shengao reminds that when moving, it must be noted that it is impossible to grasp the glass table to move.
Source: GO Jiaju Furniture Network
The category of 5/2 way Namur Pneumatic valves. A 5/2 way Namur Pneumatic Solenoid Valve has a standardized flange according to VDI/VDE 3845. This way, the valve can be directly mounted onto an appliance, such as a Pneumatic Actuator. The valve can be mounted in two ways by rotating the valve 180 degrees. The two mounting positions offer the possibility to pressurize or de-pressurize the appliance when the Solenoid Valve is energized.
Namur Solenoid Valve: 4M110-06, 4M120-06, 4M210-06, 4M220-06, 4M210-08, 4M220-08, 4M310-08, 4M320-08, 4M310-10, 4M320-10.
Namur Solenoid Valve 5/2, Namur Solenoid Valve 5/3, 3/2 Namur Solenoid Valve
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com