How to carry out the maintenance of a single-stage trolley line

How to carry out the maintenance of a single-stage trolley line:

Single-level trolley lines and multi-level trolley lines, although they belong to the category of trolley lines, and they are all in the website products, but these two, in terms of performance and application, there are still many difference. Therefore, based on this, and today is the time for the article to be updated, then it is appropriate to carry out its related explanations, so that everyone through learning, to make their own gains and progress.

The single-stage trolley line, which is used during maintenance, is very important and critical, and it is indispensable. Therefore, for us, it is a key point for learning. Then, the following Xiao Bian will explain it in detail.
The main points in the maintenance of single-stage trolley lines are:
Brush: It should be checked every 1 to 3 months according to its actual use. The main one is whether the wear is serious and if there is looseness. If the amount of wear is greater than 5mm, then it must be replaced.
Collectors: should be checked once every quarter, the focus is whether it is loose, shift, etc., and whether its wear is serious.

Universal Disinfectant Controller

In many water treatment occasions, it is necessary to add disinfectants to the water to eliminate germs and microorganisms in the water. Such as water plants, swimming pools, industrial production processes, etc. After disinfection, there will be some residual substances in the water, such as residual chlorine, chlorine dioxide, ozone, etc. Daruifuno's universal disinfectant controller can be connected with disinfectant sensors such as online residual Chlorine Sensor , online Chlorine Dioxide Sensor, online Total Chlorine Sensor , online Hydrogen Peroxide Sensor, online Ozone Sensor , water bromine sensor, Peracetic Acid Sensor and other disinfectant sensors of film coating method to realize real-time continuous monitoring of water quality. The disinfectant controller has 2 relays by default, 1 channel of 4-20mA current and RS485 digital interface, and supports Modbus communication protocol. We are a manufacturer of disinfectant controllers, we provide many different kinds of water quality analysis instruments. If you are interested in our products, please contact us.

Universal Disinfectant Controller,Amperometric Chlorine Analyzer,Chlorine Meter,Residual Chlorine Meter

Suzhou Delfino Environmental Technology Co., Ltd. , https://www.daruifuno.com