In recent years, families have been renovating new homes, looking for carpentry masters to make wardrobes less and less, and going to the building materials market to customize more wardrobes or cloakrooms. However, there is not much knowledge that consumers have to buy the whole wardrobe. If you look at a few brands, you will see it almost! How to choose the whole wardrobe? The insiders suggest that from the aspects of plate, hardware, workmanship, environmental protection, etc. The overall wardrobe is considered. Is it impossible to see where the seal is?
From the outside, the cabinet design of the custom closet is not much different. The difference is mainly the style of the cabinet door. When you buy it, you must look at the details. Otherwise, you can’t see what is good between the brand and the family workshop. the difference. What is the details? The first is the plate, the good brand, the high density of environmentally friendly plates. Good Lai Kee wardrobe Nanmen Bomei shop Liao master took out the plate, so that the Chengdu Business Daily reporter used Nails to cut the cross-section, it is difficult to draw a mark, the master said, if the density of the board cuts the work, the time is long, bearing Parts and large spans are easily deformed.
The sealing of the whole wardrobe is very important. The first-line brand uses a multi-million-yuan automatic edge banding machine, paying attention to quality control, and the edge-sealing effect of small machines of more than 100,000 yuan is very different. Consumers may wish to pay attention. Look at the edge-sealing effect --- Is it a tight seam? Can the nails reach into the gap? The most important point is, can the invisible cabinet part also be sealed? If there is no place for edge sealing, it is easy. Absorbing moisture from the air causes expansion, and it is necessary to seal on all sides to avoid formaldehyde escape. The details of the four sides of the overall wardrobe need to be confirmed with the clerk, and the whole wardrobe material is shipped into the new house for installation before acceptance.
Is the board environmentally friendly?
For the sake of health, whether the custom wardrobe is environmentally friendly is the most important consideration. Some families can still smell pungent when they use the wardrobe for two years. When you buy a wardrobe, you can smell the cabinet and smell.
Some of the store's exhibits have been exposed for a long time, and the tastes are almost the same. You can open the drawers of the closet and the drawers are usually not easy to open. If the sample and the actual product are two things to do, so it is best to choose Sofia, Haley, Stanley, Tingku, KD and other big brands, these big brands choose E1 (formaldehyde emission ≤ More than 1.5mg/L) of environmentally-friendly sheet, there is a certificate issued by the national authority quality inspection department. If the consumer chooses a brand with a low price, it is also necessary to look at whether the brand or the use of the sheet meets the environmental protection standard of the E1 level. It is best to use the product of the “10-ring certification†of the State Environmental Protection Administration.
Is the cabinet door strong?
Customized wardrobes are durable consumer goods, and the quality of the doors and hardware ensures that the wardrobe is in good condition for many years. Many consumer custom-made wardrobes like to "stand on the ground", so the door of nearly three meters high must use materials with high hardness and strength to ensure that the use is not deformed. The industry generally uses carbon steel and aluminum as the door material. Carbon steel is easy to rust. At present, aluminum is the mainstream. Aluminum is made of aluminum-magnesium alloy and aluminum-titanium alloy. Consumers can feel the hardness of the door by tapping; feel the door of the cabinet by shaking. strength. He Yang, the sales manager of Sophia's wardrobe, said: "Consumers can quickly push the door, see if the door is deformed, whether the hardware is firm, and whether the damping is moderate."
In addition, the hardware used in the cabinet door is also very important. According to Wang Rui, assistant general manager of Stanley Chengdu, the pulleys used by the big brands are made of glass fiber, which guarantees more than 100,000 times. The cheap products are usually made of engineering plastics and are easy to wear. In the Stanley Wardrobe exhibition hall, Chengdu Business Daily reporters compared Stanley pulleys and miscellaneous pulleys on the spot. The brand-name pulleys had a strong plastic smell. The brand-name pulleys were slightly pressed down and slipped. In addition, the good hardware is still very quiet. Imagine opening the door at midnight, and the sound of the sound will wake the family. The brand custom wardrobe will win in the details and environmental protection.
Welded WIRE MESH Rolls: Welded wire mesh rolls are flexible rolls of wire mesh that are made by welding steel wires together at their intersections. They come in various widths and lengths and are commonly used for a wide range of applications, including fencing, animal enclosures, garden protection, and reinforcement in concrete. Welded wire mesh rolls offer strength, durability, and ease of installation, making them a popular choice for both residential and commercial projects.
Hot-Dip Galvanized Welded Wire Mesh: Hot-dip galvanized welded wire mesh is a type of welded wire mesh that has undergone a galvanizing process. In this process, the mesh is immersed in a bath of molten zinc, which forms a protective coating on the surface of the wires. The zinc coating provides excellent corrosion resistance, making hot-dip galvanized welded wire mesh suitable for outdoor applications where exposure to moisture and harsh environments is expected. It is commonly used for fencing, construction, and industrial purposes.
Hot-Dip Zinc Welded Wire Mesh: Hot-dip zinc welded wire mesh is another term used for hot-dip galvanized welded wire mesh. It refers to the same type of mesh that has been galvanized through the hot-dip process, resulting in a protective zinc coating. The zinc coating helps prevent rust and corrosion, ensuring the long-term durability of the wire mesh. Hot-dip zinc welded wire mesh is widely used for various applications, including fencing, animal enclosures, and reinforcement in concrete structures.
Hot Dip Galvanized Iron Wire Mesh: Hot-dip galvanized iron wire mesh is a type of wire mesh that is made from galvanized iron wires and has undergone the hot-dip galvanizing process. The iron wires are immersed in molten zinc, resulting in a protective zinc coating on the surface. This coating provides excellent corrosion resistance, making hot-dip galvanized iron wire mesh suitable for outdoor applications, especially in environments where rust and corrosion are concerns. It is commonly used for fencing, agriculture, and industrial purposes.
These different types of wire mesh, including welded wire mesh rolls, hot-dip galvanized welded wire mesh, hot-dip zinc welded wire mesh, and hot-dip galvanized iron wire mesh, offer varying levels of corrosion resistance and durability. The specific choice depends on the intended application, environmental factors, and the level of protection required.
Welded Wire Mesh Rolls,Hot-Dip Galvanized Welded Wire Mesh,Hot -Dip Zinc Welded Wire Mesh,Hot Dip Galvanized Iron Wire Mesh
Hebei Aibuer trading co., Ltd , https://www.ablewiremesh.com