I don't understand the theory that is too advanced. It is only 12 years of experience in raising pigs that tells me that if the production is good, the sows must be well managed and need to be humanized to treat the sows.
During lactation, the sows eat 4-6 kg of feed per meal, and suddenly drop to 2 kg after weaning. If it is you, will you be hungry? Therefore, when we raise pigs to consider scientific management of production, we also need to consider the feelings of sows.
Usually, the sows will soon be estrus after weaning. The average time of estrus is 7 days after weaning, the earliest is 2 days, and the latest is 17 days. The sow is postponed or not estrus after weaning. It is also called the sow after weaning. It means that the sow cannot be naturally estrus within 20 days after weaning, and even if it has not appeared for more than 30 days, the sow has not been used for a long time. There is another estrus. This is a common reproductive disorder problem in the current lean meat variety and its binary hybridization, and it is more prominent in large-scale pig farms. In recent years, some farms have used hunger stimulation measures to stimulate sows' estrus. The sows are not fed or 1-2 days after weaning. The sows estrus quickly after hunger stimulation, and return to normal rearing immediately after breeding. However, this practice will reduce the breeding rate of the sow and the conception rate will not be too high.
Think about it, hunger itself is a big stress, at this time the sow will be restless and screaming to express emotions. Just like human beings, women who have given birth to children know that postpartum mood swings are large and easy to get irritated. This is because all kinds of hormones in the postpartum body have not returned to normal, this stage is very easy to get angry, so as long as there is a small stimulus, it is easy to get angry. At this time, the sow feeding amount is reduced to 2 kg. Isn't it artificially irritating the sow? Feeding for 3-5 days, the sow has always maintained an angry sub-health state. Do you think about the various reproductive performance of the body? Can hormone levels be adjusted? Therefore, many large-scale pig farms will reflect the problems of low sowing rate and high return rate.
Of course, from a scientific point of view, weaned sows need to limit feeding and prevent sows from getting too fat without estrus. But can we have a compromise? Yes, it is very simple to replace the reduced 2 kg concentrate with green feed.
Our farm is feeding 2 kg of sweet potato vines and 2 kg of concentrate after weaning. Of course, there are also many people who grow grassy and weeds, which can be used as green fodder. This kind of diet can make the weaned sows have a good transition, because there are always chewy things in the mouth, the hunger is greatly reduced, and the stress is reduced. At the same time, the green feed has a certain effect on the peristalsis of the sow's intestines, reducing the constipation of the sows.
Feeding green fodder, there is a problem to be noted, the sow is more deworming; the pig potato vine is watered with biogas liquid, and there are more parasite eggs. Of course, the scale of the field, the supply of green feed is also a problem; just like our field, in order to solve the supply of the 12,000 sows of sweet potato vines, we invite people to plant sweet potato vines.
In addition to feeding the green feed transition, my younger sow, my request is not allowed to help the birth, not allowed to induce labor, because the fetus is about the same size as our hands, the hand can go in, the fetus can also come out. Young sows have midwifery or oxytocin, which is particularly harmful to the birth canal and is not conducive to the production of the next child. At the same time, each sow must be brought with 10 litters, which will ensure effective nipples and prevent some nipples from shrinking due to less use. It is important to know that sow lactation is actually a process of hormone excretion in the individual. If there is no pig sucking, then some hormones can not be excreted, accumulated in the body, discharged from the uterus, and various troubles will increase.
In addition, we have been performing weaning for 21 days. Some people may worry that early weaning will be detrimental to piglets and sows. After several years of practice, it is found that on the contrary, piglets are much better. Because after 21 days, the sow milk nutrition has basically not been able to supply the growth needs of the piglets, and all the maternal antibodies have disappeared. If you feed again at this time, the growth and immune resistance of the piglet will be affected. Therefore, the use of the teaching material is more beneficial to the health of the piglets, and the pigs in the nursery are much less. And 21 days for the sow uterus to rejuvenate, time is enough.
One of the most fascinating materials of our time is polycrystalline cubic boron nitride PCBN - the second hardest material after diamond. At CeramTec, PCBN is used as a cutting material from which indexable inserts are manufactured for machining.
PCBN is produced synthetically and is a "composite material" made of cubic boron nitride and a mostly ceramic binder phase. The ratio of cBN to binder content and the cBN grain size determine the application.
PCBN cutting materials are used in the machining of hard and/or highly abrasive workpiece materials. The high hardness and the extremely high hot hardness (up to temperatures above 1,000°C), the edge stability and inertness towards ferrous materials as well as the basically good chemical resistance give CBN cutting materials a high potential for use in machining. On the cutting material side, a distinction is made between high- and low-cBN cutting material grades.
PCBN (Polycrystalline Cubic Boron Nitride) blanks for cutting tools are composite ultrahard materials sintered by polycrystalline CBN and carbide alloy under ultra-high pressure and high temperature conditions. They combine the hardness, wear resistance, and thermal stability of CBN with the impact resistance and toughness of carbide alloy. PCBN blanks are highly suitable for cutting ferrous and non-ferrous metals with high hardness.
PCBN Composites and Inserts
Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com