Regarding the selection of air compressors, it has always been a confusion for air compressor buyers. How can we buy suitable and cost-effective air compressors for enterprises?
Regarding the selection of air compressors, it has always been a confusion for air compressor buyers. How can we buy suitable and cost-effective air compressors for enterprises? According to the gas consumption and gas pressure during normal operation of the gas tool, a suitable air compressor can be used to ensure the normal operation of the pneumatic tool and ensure the lowest energy consumption. The selection of air compressors mainly starts from three aspects.
1. The working pressure and pressure unit of the air compressor is expressed in many forms. Here, the pressure indicating unit commonly used in the screw air compressor is mainly introduced; 1 working pressure, the domestic user often calls the exhaust pressure.
Working pressure refers to the highest pressure of air discharged from the air compressor; 2 commonly used working pressure units are: bar or Mpa, 1bar = 0.1Mpa; 3 general, the user usually refers to the pressure unit: Kg (kg), 1bar = 1Kg .
2, the volume flow of the air compressor 1 volume flow, domestic users are often referred to as the exhaust volume. The volumetric flow rate refers to the amount of gas discharged per unit time of the air compressor under the required exhaust pressure, which is converted into the intake state. 2 volume flow unit: m3 / min (cubic / minute) or L / min (liter / minute), 1m3 (cubic) = 1000L (liter); 3 general, commonly used flow unit: m3 / min (cubic / Minutes); 4 volume flow in China is also known as the displacement or nameplate flow.
3, the power of the air compressor (1) general, the power of the air compressor refers to the nameplate power of the matching drive motor or diesel engine;
(2) The unit of power is: KW (kilowatt) or HP (pound/horsepower), 1KW ≈ 1.333HP. Selection of working pressure (exhaust pressure).
When preparing to purchase the air compressor, first determine the working pressure required by the gas end, plus the allowance of 1 to 2 bar, and then select the pressure of the air compressor. (The margin is considered to be installed from the air compressor. The pressure loss from the location to the actual end of the pipeline, depending on the length of the distance between 1 and 2 bar, consider the pressure margin).
Based on the above key selection factors, in the era of high efficiency, the air compressor selection tool of Nanbei Chao Mall can quickly and efficiently achieve the purpose of selection. If you know the parameters, you can find the right air compressor simply and quickly by using the air compressor quick selection tool developed by Nanbei Chao Mall.
To use the North-South Tide Mall air compressor selection tool, please go to: http://tool.nbchao.com/air/
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Escalator,Flat Escalator,Escalator Stairs,Escalator Lift
MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com