In general, floor outlets are important electrical accessories that household appliances must use. Because they are commonplace, they are often easily overlooked by people. Firefighters advise that proper use of floor sockets should not be overlooked, otherwise fire could be caused by paralysis. Floor sockets are commonly used in life. Let's take a look at the classification and installation methods of floor sockets.
one
What is a floor outletGround socket (also known as ground socket), referred to as: ground plug. Full name: Home and similar ground sockets. Sockets that are installed on the ground or the like and used to connect with fixed wiring are usually used as terminals and outlets of the ground wiring system to remove power, signals, and data from the ground wiring system. Mainly used for office space, airports, hotels, shopping malls, homes and other large open-air indoor places, a wide range of uses.
two
Classification of floor sockets1ã€The ground socket is divided into two types: universal type and damping type
This product is ultra-thin design, the surface is uniform and fine, smooth and beautiful, and close to the mounting surface. When opened, the surface is slowly and evenly raised by the damping mechanism. Compared with bouncing type, it has less noise and high safety. This series of products use trapezoidal handle structure, the switch is more flexible and feel more comfortable.
2, multi-function ground socket box
The material of the multifunctional ground socket box is as follows: copper alloy ground socket, zinc alloy ground socket, stainless steel socket, these three. The material of the ground socket refers to the surface material, which is the alloy surface treatment. It is not pure copper or pure. Zinc's.
(1) There are three types of open methods: pop-up type, open type, and spiral type.
(2) According to the size of the common single and double ground socket.
There are three and six two-way ground sockets. In addition there are double ground sockets, the application of the module is more diversified.
One refers to a functional module.
Commonly used functions 120 modules and 118 modules.
The type 120 common module is based on 1/3, that is, on a standard 120mm x 74mm panel mounted vertically, the next three 1/3 standard modules can be installed. Modules are categorized into 1/3, 2/3, and 1 bit sizes.
Type 118 common modules are based on the 1/2 standard, that is, on a standard 118mm x 74mm panel mounted horizontally, the next two 1/2 standard modules can be installed. The module is divided into two types, 1/2 and 1 in size. At present, in actual installation and use, the 120-type and 118-type modules have a gradually general trend. A panel can hold three standard 1/3 modules and two 1/2 modules.
Two modules: three-hole power outlet
One module: two-hole power socket, VGA pin, VGA aperture, single audio, dual audio, telephone module, network module, microphone module, TV module, S-terminal module, blank module.
Installation: Sockets used to connect to fixed wiring on the ground or the like, usually as the terminal and outlet of the ground wiring system, to remove the power, signals, and data in the schematic wiring system of the ground distribution wiring system.
three
There are seven hidden dangers that cause fire in switch sockets1. The socket is pressed by flammable substances or dust falls into it to cause a short circuit, or is installed in a flammable and explosive dangerous place. When a plug is inserted or removed, a spark is generated and an explosion is caused by fire;
2. If the plug is damaged, it is not replaced in time, and the private bare wire is used instead of the plug to cause short circuit or spark, which can cause combustibles to catch fire.
3. Some of the bedside switches are put into place immediately after use. The switch hits the bed frame or the wall and breaks the outer insulation layer, which may cause short circuit.
3. The operating voltage and operating current of household appliances are inconsistent with the power used by the outlets. Long-term overloading may cause fires if the temperature is too high.
5. Improper installation of the switch, especially if the switch is placed on a flammable object. Once the jacket of the wire lead-out is scratched, the wire core will be exposed or water vapor will infiltrate, causing a short circuit, or an arc will cause a fire when the switch is disconnected;
6, the distribution board is not placed in the junction box, when the fuse is blown, there will be splashing of hot metal particles, which will cause the combustibles below to burn;
7. If the combustible gas used by households is leaked due to a pipe or valve and the combustible gas is mixed with air and reaches a certain limit, the electric switch that does not eliminate the arc device will open and close, and spark will be generated.
Although the floor socket has brought a lot of convenience, but it also has some hidden dangers, so be careful when installing the floor socket, shut the socket quality and installation.Flooring Flooring Flooring Installation
Hex Key,Hex Key Set,Hex Allen Key,Allen Wrench Set
henan horn tools co.,ltd. , https://www.hornhandtools.com