Ordinary cement concrete pavement, even if the label reaches the C30 level, also often appear the surface of ash or even sand phenomenon. This is caused by a number of possible causes: Self-mixed concrete may be caused by unsatisfactory quality of cement, large gravel content, poor construction processes, poor maintenance, or premature activation; if it is used The appearance of ashing and dusting on the pavement of commercial concrete is the most common reason that road concrete is not used, and the amount of ordinary concrete fly ash is too much. The compressive strength of such road surface generally meets the design requirements, only the surface hardness and The two indicators of wear resistance are lower. The most direct cause of ashing and sanding on cement concrete pavement is caused by insufficient abrasion resistance. Therefore, improving the wear resistance of ash-cemented cement concrete pavement can prevent further deterioration of the cement concrete pavement from ashing and sanding.
Taibang Concrete Sealing Curing Agent is an active, colorless and transparent chemical water-based agent. It is composed of inorganic substances, chemical active substances and complexes. It is uniquely formulated. It is easy to use, non-toxic, non-flammable, and can reduce the adsorption of concrete surface. Dustproof and hardwearing. Its working principle is chemical reaction with a large amount of semi-hydrated cement, free lime, and calcium in concrete (continuous reaction time is about 60-90 days), forming a permanent gel, the gel can be processed in the concrete The interior crystallizes into a hard, wear-resistant structure. This results in a dust-free, dense whole.
The construction process of the concrete seal curing agent is very simple, the overall cost is very low, the treated pavement will not change the appearance effect, and will not affect the inherent performance of the original concrete pavement, some properties, such as temperature resistance, impermeability, anti-aging, etc. Even better performance.
Taibang Concrete Sealing Curing Agent is an active, colorless and transparent chemical water-based agent. It is composed of inorganic substances, chemical active substances and complexes. It is uniquely formulated. It is easy to use, non-toxic, non-flammable, and can reduce the adsorption of concrete surface. Dustproof and hardwearing. Its working principle is chemical reaction with a large amount of semi-hydrated cement, free lime, and calcium in concrete (continuous reaction time is about 60-90 days), forming a permanent gel, the gel can be processed in the concrete The interior crystallizes into a hard, wear-resistant structure. This results in a dust-free, dense whole.
The construction process of the concrete seal curing agent is very simple, the overall cost is very low, the treated pavement will not change the appearance effect, and will not affect the inherent performance of the original concrete pavement, some properties, such as temperature resistance, impermeability, anti-aging, etc. Even better performance.
nanotechnology kitchen sink faucet,stainless steel sink,gug grey kitchen sink,kitchen sink with faucet
Heshan Dingquan Sanitary Ware Industry Co., Ltd , https://www.dqoksanitary.com