I. Security responsibility measures
Any unit that operates with a risk of oxygen deficiency shall establish and improve a safety production management organization, implement a safety production responsibility system, be equipped with full-time or part-time management personnel for safe production, and designate responsible persons and guardians for dangerous operations of hypoxia.
1. The principal responsible person of the unit has overall responsibility for the safety production work of the unit, and is responsible for the main leadership responsibility for the safety of the operation of the risk of oxygen deficiency.
2. The responsible person in charge of safety is directly responsible for the examination and is responsible for approving the license for dangerous work for anoxic danger.
3. The production technology management personnel, as the designated person responsible for the operation of the anoxic hazard, have direct management responsibility and are responsible for the application for permission and on-site command of the operation of the anoxic hazard.
4. The safety management personnel are responsible for the safety review, supervision and inspection of the operation of the anoxic hazard, and are responsible for the safety review of the anoxic hazard operation plan and the on-site supervision and inspection.
5. Operators and guardians are responsible for obeying, obeying, and must strictly implement safe operating procedures and approved operating plans and operational safety measures.
Second, safety investment measures
1. We will improve the on-site conditions of hazardous oxygen-deficient operations in accordance with the law, ensure that the safety investment funds are fully in place, and arrange for the cost of providing labor protection articles and conducting safety training.
2. The main contents of safety investment in the work of anoxic hazard include the following aspects:
1 Safety facilities, inspection and testing devices, safety warning signs, etc., equipped with dangerous operations for lack of oxygen.
2 Configure equipment and tools for hazardous operations that meet the requirements of safety technical specifications.
3 Equipped with a sufficient number of emergency rescue facilities and fire fighting equipment.
4 Equip workers or emergency rescue personnel with personal labor protection products that meet the requirements of the national standard.
5 Regular occupational health checkups and occupational rehabilitation for the workers.
Third, supervision and inspection measures
1. Formulate a safety supervision and inspection system for the operation of hazardous oxygen hazards and strengthen safety supervision and inspection.
2. Conduct daily supervision and inspection of the performance of personnel involved in the operation of anoxic hazard, promptly submit safety notices, and record feedback. For violations, the operator must present a safety warning on the spot and deal with it seriously according to the system. The violation of the rules and the practice of forcing risky operations must be resolutely stopped.
3. For the hazard-stricken operations that are applied for in the production process, it is necessary to clearly analyze the hazards and harmful factors, put forward safety review opinions, and make safe work permits. For applications that do not have working conditions, no permission is granted and relevant operations may not be carried out.
4. On-site supervision and inspection must be carried out on workplaces where there is a risk of oxygen deficiency, and compliance with safety procedures and implementation of various safety measures shall be ensured in accordance with the law.
5. Safety signs must be posted or hoisted at the workplace to clarify precautions for safe work, use of labor protection articles, and emergency rescue measures to identify hazards and hazardous areas of hazardous operations.
Fourth, personal protective measures
1. Before the operation of anoxic hazard, personal labor protection articles must be carefully inspected. If abnormalities are found, they should be replaced immediately.
2. Workers who are at risk of oxygen deficiency must wear protective clothing, shoes and hats and other special labor protection articles in accordance with the regulations. In the case of special oxygen-deficient hazardous operations, it is forbidden to use a filter mask when wearing an isolated gas mask.
3. The on-site guardian should closely monitor the changes in the operation of the workplace, record the number of workers and the operation time, and implement alternate operations to reduce the residence time of the operators at the workplace. In the case that the operator does not leave the operation site where the oxygen deficiency is dangerous, he/she may not engage in other work, and may not leave the post without authorization. If abnormal conditions of hypoxia are found, effective measures should be taken in time.
4. Emergency rescue personnel must wear personal labor protection articles according to the accident emergency rescue plan and depending on the job site to ensure their own safety. Never take any personal protective measures and take risks. According to the website of the State Administration of Work Safety, many accidents involving dangerous activities of oxygen deficiency occurred in July 2007, all of which resulted in an increase in accident casualties and an artificial increase in accidents due to improper rescue. The lessons were extremely profound.
V. Emergency rescue measures
1. According to the safety assessment and analysis of the workplace where the oxygen is at risk, the accident emergency rescue plan is formulated, and emergency training and pre-planning exercises are regularly carried out.
2. When the risk of oxygen deficiency is discovered, the operation must be stopped immediately and the operator must be evacuated from the job site.
3. Operators and emergency responders must immediately use isolated breathing protection when an anoxic hazard occurs.
4. In workplaces where there is a risk of oxygen deficiency, rescue equipment such as isolated breathing apparatus, safety ladders, safety ropes, safety belts, and necessary rescue tools or equipment must be placed nearby to facilitate rapid rescue in exceptional circumstances.
5. Persons who have suffered from hypoxia should be given immediate emergency treatment and hospital treatment, and the best time for treatment should not be delayed.
(Safety Management Network)
Greenhouse Growing Light
Greenhouse Grow Lights
Greenhouse Plant Lights
Plant Grow Lights
Advantages and Special Characteristics of CTL LED Grow light:
1. Combine of super power and high power LEDs: 40W super power+ 3W High Power LEDs;
2. Combination of 3 independent channels: AquaSpecial/ BluePlus/ PurplePlus;
3. Programmable auto-dimmed control: Each channel can be separately and smartly auto-dimmed by the programmable controller;
4. Energy saving;
5. All-day climate light cycling:Easy to make the all-day climate light cycling sunset/sunrise/cloudy/sunny and moon light;
6. Special Lens: Professional optical lens with 105degeee and 78 degree bring wider coverage but better light intensity;
7. NIDEC Fans: Silent NIDIC fans(Japanese Brand) widely used in IMB/HP/DELL Server are equipped in our light;
8. Serial control for multi lamps;
9. Aluminum housing: multi lamps can be inter-connected and easily controlled by one external controller;
10. Advance heat dissipation design: Large heat dissipation design make sure LED long lifespan;
11. Elegant shape: the product surface is made of brushed anodic alumina oxide;
Plant Grow Lights,Greenhouse Plant Lights,Greenhouse Growing Light,Hydroponic Indoor Plant Grow Light Kit,Plant growing Lamp Light for Hydropoics Mini Greenhouse
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com