How to install guide wheels and bearings?

Source: China Bearing Network Time: 2017-10-06

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1 In front of the device; guide wheels and bearings, bearing blocks, dampers and caps should be carefully removed in clean kerosene.
2 In the case of insisting that the device and hands are clean; first apply low temperature grease to the bearing and housing.
3 Then press the bearing and the guide wheel into the drill bed respectively (the guide wheel of the newspaper with the top and bottom of the pad); tighten the mother of the two ends of the guide wheel with the appropriate torque; tighten the plug.
4 Device: The device hole on the wire frame is cleaned and cleaned (can be used as fine sandpaper); press the installed guide wheel and the guide wheel seat straight into the pen (Note: Do not use too much force to pad with wood); The caps at both ends can adjust the orientation of the guide wheel freely (this is very important; it clarifies the working condition of the bearing); and then tighten the top wire (not to be vigorous; it is better to restrain the bearing seat).
5 Key points: In the whole process; there is no part that needs to be knocked on the device; the appearance of all the devices that cannot be installed is wrong. It is necessary to insist that the guide wheel works smoothly; there is always a working space filled with grease to fill the bearing; It is necessary to pay attention to the insulation cleaning of the guide wheel sleeve; to ensure that the guide wheel works sensitively; there should be no jamming and periodic tightness. These are the necessary conditions for the guide wheel and the bearing to work smoothly for a long time.

Recommend to friends comments close window

Bearing related knowledge

Bearing selection of the outline of the stainless steel deep groove ball bearing depicting the bearing of the joint bearing can be used to analyze the strengths of the linear motion ball bearing of the large motor bearing housing

This article links to http://
Please indicate the bearing network http://

Previous:The demand for smoothing agent for rolling bearing Next: Bearing rust

Shower Faucet

Shower Faucet,External Shower Mixer,Bathroom Shower Mixer,Wall Mounted Shower Mixer

Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com