Correct use of lightweight fire protection clothing and introduction of its features

Features

The use of specially developed fibers makes it possible to protect various chemicals and provide flame retardancy sufficient to maintain or even improve the effectiveness of thermal protective clothing.
Suitable for protection against hazardous chemicals and has passed the appropriate CE standard and type 4 (penetration splash) conforming to the anti-static EN 1149.1 standard
The main technical parameters

1 Water permeability resistance does not leak
2 Tensile strength, N/5cm, warp, latitude ≥450
3 tear strength (single tongue method) N, warp direction, weft ≥32
4 Acid Permeation Resistance (100mm×100mm), 30min (80% H2SO4, 60% HNO3, 30% HCL) Impervious
5 anti-alkali penetration performance 6.1mol/L NaOH, (100×100mm), 30min impermeable
6 Flame Retardant Performance: Continuing Burning Time, S Flame Retardant Time, S Damaged Length, cm ≤ 10
7 Heat aging resistance(125oC×24h) Non-sticky and non-brittle
8 Cold resistance (-25oC x 5min, folded 180o) No cracks
9 Gasoline resistance (dipping 120# gasoline, 30S) No cracks, no stickiness
10 Overall weight of chemical protective clothing, kg≤5

Instructions

1. Open the opening of the one-piece jacket. Put your feet into your pants and put on the rubber boots. Finish the clothing. Raise your clothes at the waist and then wear your hands.
2. Put on the cap of chemical protective clothing, straighten out the chest protector cloth, pull the chest cover sheet after folding, and then cover the chest cloth tightly, and then fasten it on the chest.
3. Straighten out the hat and wrap the tightening strap around the neck around the neck. Put on the metal buckle at the moderately elastic part of the neck.

China Labor Insurance Network