After the floor is paved for a long time, it will inevitably appear to be faded, fluffed, deformed, etc., which greatly affects the appearance of the home. Is it necessary to completely remove the floor and re-lay the new floor? The answer is no. If the floor is covered with solid wood and other materials, you can completely renovate the floor through renovation and rejuvenation.
Part1: Advantages of floor renovation and renovation
Compared with floor coverings such as floor tiles, wood flooring is comfortable and natural, so it appears in many homes. However, after a long period of stepping on the floor and the natural environment, various loss phenomena will occur. The floor renovation process can quickly rejuvenate the floor.
1. Floor renovation vs. new flooring
Floor refurbishment means that the old floor is restored as new by grinding, scraping, lacquering, waxing and polishing the surface of the floor. Compared with the new floor, the cost of floor refurbishment is low, and after the old floor is used for a long time, the wood quality becomes stable and the environmental protection is much better than the new floor.
2, the choice of floor renovation time
There is no fixed time limit for how long it takes for the floor to be refurbished. If some floors are very carefully maintained and there are no major problems, then even if they have been used for ten years, they do not need to be refurbished. However, if some floors are not well maintained, there will be paint drops, cracks, etc. in a few years. For various problems, it is necessary to carry out refurbishment as soon as possible, because if it is not handled quickly, the damage will become more and more serious.
3, the two practices of floor renovation
There are two ways to renovate the old floor. One is to renovate directly at home by the construction workers, and the other is to remove the floor and then renovate it by the manufacturer before returning it to the installation. It takes 8-10 days to renovate directly at home. It takes about 10-15 days to remove the floor and take it to the factory for renovation. The first method is more common, but dust and noise pollution are more serious during the construction process. The second method is better for refurbishing, but it is more troublesome and more expensive.
4, floor renovation requirements for flooring materials
Solid wood, solid wood composite, bamboo and wood can be refurbished
After the three floors are damaged, refurbishment measures can be taken. However, it should be noted that the surface thickness of these floors needs to be 4 mm, because the floor needs to be polished several times when the floor is refurbished. If the floor surface is too thin, the intermediate layer will be polished to affect the service life of the floor.
Reinforced flooring should not be refurbished
If the laminate flooring is severely damaged, it is not recommended to renovate it. It is best to replace it all. First, because the price of laminate flooring is relatively low, the price of new flooring is not much different from the price of renovation; on the other hand, the surface of the laminate is the hardest part, and the middle is generally made of high-temperature glue. After renovation, it is polished. It is easy to destroy the surface wear layer, which is more likely to cause the floor to age.
5, the damaged floor is not recommended for renovation
If the floor is damaged, and there is a large area of ​​mildew and deformation, it is not recommended to be refurbished. Because the mildew of the floor will generally penetrate into the interior of the floor, the surface of the polished floor will still have moldy spots; and the deformation and damage of the floor cannot be remedied by sanding. If most of the floor is damaged, moldy and deformed, it is recommended to buy it again.
6, should not choose partial renovation
The overall renovation of the floor of a room is better, and the effect of the new floor can be basically achieved. The choice of partial refurbishment is likely to cause new and old differences between the floors. The longer the floor life, the more obvious the difference between old and new.
Part2: Step-by-step floor renovation
Floor refurbishment requires the use of professional grinding machines, as well as painting and other processes, so it is generally handed over to a special refurbished company. However, the owner still needs to understand the basic method steps of refurbishment to prevent the construction workers from burying themselves.
The first step: sanding the floor
The first step in floor refurbishment is to use a large floor refurbishing machine to remove the lacquer layer and the surface layer 1-2 mm. Note that sandpaper of 40 mesh, 80 mesh and 120 mesh thickness is used for grinding three times. The larger the mesh size, the smaller the sandpaper particles, and the less scratches left by the sanding, ensuring that the polished surface is fine and smooth.
The second step: scraping putty
After the floor is polished, it is necessary to scrape the putty to level the floor, use the special transparent primer putty matched with the floor paint, and scrape it on the polished floor to be dry.
The third step: brush primer, color processing
After the putty is applied, the floor is then primed or tinted. Since the texture of the solid wood surface is natural, it is impossible to change the color of the color, and only the depth of the floor color can be adjusted.
The fourth step: brush topcoat
After the primer is dry, brush the topcoat, dry it again, and then grind it with water sandpaper. Grind the floor surface to a rough feel, remove the dust, and brush the second coat.
Step 5: Polishing and polishing
Part3: Renovation does not leave regrets, do not know
The basic process steps for renovating old floors have been mentioned earlier, but in order to ensure satisfactory refurbishment, there are some issues to be aware of when renovating the floor.
1. Clearance furniture before renovation
Before the floor is refurbished, all the furniture in the house must be removed. On the one hand, the furniture is not stained with dust, and on the other hand, the floor renovation operation is convenient.
2, should choose a special floor paint
Floor refurbishment requires the use of paint, it is recommended to use water-based environmentally friendly paint, and it is a special floor paint. When purchasing the floor paint, pay attention to the parameters such as the wear resistance of the product, and check the test certificate to ensure excellent environmental protection.
3, the number of floor painting
When renovating the floor, it is generally necessary to brush the primer once and paint it twice. If there is any flaw on the surface of the polished floor, it is necessary to brush the primer several times according to the situation.
4, change the floor color
The texture of solid wood flooring is natural, and the color cannot be changed when refurbished, but the color of the floor can be adjusted. During the refurbishment process, the desired pigment can be applied to the floor paint and applied to the floor. However, if the floor itself is darker and you want to become lighter, you need to polish it first, and brush the paint several times to make the light color cover the dark color.
Solar Street Light,Solar Led Street Light,Solar Powered Street Lights,Solar Street Lamp
Zhongshan Tiger Lighting Co.,Ltd. , https://www.tigerstreetlight.com