How to choose an integrated ceiling buckle board according to space

The integrated ceiling strip aluminum buckle plate is a long strip of aluminum buckle plate. At present, there are several types of spraying, rolling and laminating. It is generally applied to walkways and other places, and it helps to reduce the length of the design.

The specification is 100M or 120M wide, and the length can be arbitrarily cut according to the size of the room. At present, the bar-shaped aluminum buckle plate in home decoration is used more.

The square aluminum buckle plate is divided into 300MX300M, 600MX600M two kinds of specifications.

The former is applicable to places that are easily contaminated, such as kitchens and toilets, while the latter is generally used in public places such as offices and is currently the mainstream product. Square aluminum buckle board is divided into hollow and flat two.

The main advantage of the hollow aluminum buckle is that it can pass moisture. During the bathing, especially in the winter, the water vapor spreads to the surroundings. If the space is very narrow, people will soon feel bored, and even people with bad health will be in danger. It is too cold to use an exhaust fan to circulate the air. The use of this hollow aluminum buckle plate allows moisture to enter the top through the pores, to avoid the formation of water droplets on the surface of the human body discomfort.

In the kitchen, flat aluminum buckles must be used. For example, hollow aluminum buckles are selected. Smoke penetrates the top of the holes and hygiene is an annoyance.

Grid aluminium gussets and decorations for commercial spaces, balconies and aisles. The specification is 100MX100M. Looks elegant and spacious, transparent space.

Buy aluminum buckle plate, the most important thing is to check its aluminum thickness. Generally, the aluminum buckle of 300MMX300MM needs 0.6, while the aluminum buckle of 600MMX600MM needs 0.8MM. When choosing, pay attention to whether the merchant increases the overall thickness by thickening the paint layer. This kind of aluminum buckle plate should not be purchased.

Buy aluminum buckle plate, but also check the quality of the material to prevent illegal manufacturers use stainless steel to fake aluminum, pure aluminum or impure aluminum or stainless steel, you can use the magnet to verify, pure aluminum is not Magnetic absorption, while secondary aluminum or pseudo aluminum can absorb magnetism.

Ceilings Integrated ceiling Ceiling Mounting space Home renovation Paint decoration Design Room Kitchen Integrated ceiling

Sub-controller

Sub-controller of LED applying system. The DMX-S8 receives the pixel data frame sent by the RTP-S1500 Main Controller. According to the address set by itself, the corresponding data in the pixel frame is taken out. After the format is adjusted, the data is sent out from the controlling port at a specific timing sequence to control the LED light to change color. Set up 2 RJ45 network interfaces; When using unshielded Twisted Pair, the distance of transmission from the main controller to the sub-controller and sub-controller to sub-controller is more than 100 meters; Connect to the switch for network to extend the distance of transmission; Single controller can connect up to 16 computer; Automatically identify its position in the system; Set up 8 DMX512 controlling ports with auto-addressing function. The number of single-port controlling pixels is 170 full-color pixels, 512 monochrome pixels, and the type of connector is the pluggable terminal; Each port conduct optical isolation protecting to ensure the stability of the entire controlling system;

Sub-controller,Sub Controller,DMX 512 Sub Controller,Auto-addressing Sub Controller,LED Lighting System Sub Controller

StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com