Room environmental control requirements for laying an anti-static floor: 15°C to 35°C, relative humidity: 45% RH to 75% RH;
2, decorative floor:
Disable the use of sharp and sharp edges on the decorative surface of the raised floor to prevent direct damage to the anti-static properties and aesthetics of the decorative surface;
During use, people are forbidden to jump directly from the height to the anti-static floor, and brutely move and bruise the floor when moving articles;
When moving objects on the movable floor, it is forbidden to push objects directly on the surface of the board, so that the objects and the ground are directly rubbed, resulting in scratches on the board surface. When carrying the items, use the cart with rubber wheels to carry or carry the objects. Isolation pad between the profile and the floor to prevent damage to the board When placing heavy items on the surface of the anti-static movable board, it should be smoothly placed so as not to damage the anti-static floor. When the equipment in the space below the floor is maintained, apply the floor suction board. Install the floor to the floor, and remove the floor to prevent damage to the floor. Use clean mop and rags to keep the floor clean. Be careful not to spill a lot of detergent liquid on the floor to prevent the liquid from flowing to the floor. Anti-static floor under the influence of the lower part of the normal operation of the line and equipment 3, bare floor and ventilation floor:
The use of anti-static spray layer to prevent scratches on the floor, if found to scratch the application of gray paint to make up the brush, to ensure the integrity of the coating.
Prevent small objects from falling into vents on ventilated floors (such as coins, keys, paper clips, pins, etc.) to prevent damage to ventilation regulators and other equipment.
[Automatic Switch, Free Your Hands]: Cabinet light has two working modes, Motion & Light Sensor Mode, Always On and Off Mode. In G mode, this counter light automatically turns on when it senses human motion within 10 feet in a dark environment, and automatically turns off after 20 seconds of inactivity. You can use these lights as normal light or safe light.
[Upgraded Version & More Bright Sensor Closet Light]: With 20 LEDs(Not 10 LEDs) for each light, up to 160 lumens, more bright than other LED closet lights in the market, very easy to find what you're looking for and perfect to light up in a large space where there is no light system, like the cabinet, wardrobe, stairs, etc. HIBOITEC motion sensor light is the best choice for you.
[Larger Battery Capacity & Rechargeable]: Built-in 1000 mAh high-capacity rechargeable battery, has larger battery capacity than other led cabinet lighting, easily to charged via USB. After fully charged, these closet lights last for up to 8 hours under on mode and last 1-2 months under motion sensor mode. NEVER replace AAA batteries frequently. Energy Save & Save More Money!
[Two Ways to Install]: Easy to install and remove without any other tools. Using Magnetic Back Design, can stick on any ironwork, allows you to change the its location you need. Or you can use the included tape to attach the iron to any non-ferrous product surface. When you need to charge or change position, you can take down the closet lights at any time.
Solar Motion Light,Best Outdoor Motion Sensor Lights,Indoor Motion Sensor Light,Outdoor Sensor Lights
Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlight.com