Many people want to put wallpapers directly after finishing the paint, but they don't know if the bottom is good or not, and they worry about whether or not they will become troublesome when they are posted, and whether there will be any sequelae in the future. Today Xiao Bian took everyone to look at latex paint wall wallpaper can it?
It is not a difficult problem to solve wallpapers on latex paint walls. Because the latex paint wall surface is also a treated wall surface, if you want to paste wallpaper, you need to do some processing. In fact, there are many such cases in the life. After finishing the latex paint, the effect was not good, and the interior space did not look warmer. Therefore, although there were some procedures needed to change the wallpaper, the latex paint would be wasted. Next, let's take a look at some of the methods of latex paint wallpaper.
1 , latex paint wall wallpapers? |
Of course you can be friends! Now there is a kind of wallpaper interface agent on the market, as long as you use it, you don't need to do complicated wall surface treatment. The wallpaper interface agent can roughen the surface of the base layer, make it easier to paste wallpaper, and avoid problems such as foaming. By the way, remember to do a layer of base film when you paint wallpaper on the latex paint wall, which can make the wall moisture-proof, so that the wallpaper is not easy to damage and more durable.
2 , how to paste wallpaper wall wallpaper? |
How is latex wallpaper applied to wallpaper? Is it different from other wall wallpapers? Actually, the process of applying latex wallpaper directly to wallpaper is not very different from the general wallpaper layout. The specific methods are as follows:
(1) Get ready to use the wallpaper widget and measure the wall size. In general, tools like scrapers, knives, rollers, tapes, glue, sandpaper, gloves, sponges, brushes, buckets, etc., are all necessary tools. The size of the wall can be determined to determine the size of the wallpaper, the number of sheets, and the like.
(2) deal with the wall surface. This is an important factor in determining the effect of wallpaper directly on the latex paint wall. In addition to removing the dirt on the wall, if the wall has cracks, pits, etc. to use gypsum powder to fill. By the way, the walls of wallpapers must be dry. We can do film experiments. No water vapor wall is really dry. After this we can modulate the wallpaper glue.
(3) crop wallpaper. According to the length and width of the wall surface that has been measured, the desired wallpaper size is cut out. Xiao Bian here to remind everyone that this step in the latex paint all the walls of the wallpaper is the most careful, because you want to ensure that the wallpaper between the flower shape, size, consistent.
(4) paste wallpaper. After cutting the wallpaper we started to post from the corner. At the same time with a scraper hanging over the paper, squeeze out the excess glue, so that the wallpaper is more firmly posted. If glue sticks to the pattern of the wallpaper, everyone can pat dry with a sponge. In the end, you remember to trim the extra corners.
Xiaobian conclusion: After reading so many procedures and methods for wall painting of latex paint, you can refer to it if you have a similar situation. What will be a more program for your own home to become a dream? The above is the relevant information that Xiaobian can bring about for latex paint wall wallpaper . Hope to help you! More home improvement knowledge, please pay attention to this site information!
Wallpaper home wallpaper
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com