| Home>Bearing knowledge>What problems should be paid attention to when using linear guides? |
What are the problems to be solved with linear guides?
Source: China Bearing Network Time: 2018-07-01
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Smooth 1. When the oil is smooth; according to the condition of the slider; sometimes the oil can not reach the track. If this happens, please negotiate with NSK.
2. If the product has been coated with anti-rust oil on delivery, please wipe the anti-rust oil clean before use; then apply the smooth oil before applying.
Matters needing attention in application 3. Please set the operating temperature limit below 80 degrees (except for the heat-resistant products). Beyond this temperature; plastic end caps can be damaged.
4. When the slider is in the reverse hanging condition (for example, when it is fixed on the ceiling and the slider is facing downward); if one end of the cover is damaged; the ball will roll out; causing the slider to fall from the guide rail. Regarding this use; Please adopt appropriate measures such as additional safety equipment beforehand.
5, when using; please try to prevent the entry of dust or foreign matter.
6. When the customer cuts off the guide rails personally; after cutting off, please completely remove the burrs and curled edges of the cut surface.
If the storage is in poor condition, the guide rail will be deformed. When it is stored, place it on the proper plane; keep it horizontally.
Assemble 7, sometimes only need to tilt the rail; the slider will move; so at this time should pay attention not to make the slider fall off the rail.
8. The standard end cap is made of plastic. If it is struck or bumped, it will be damaged; therefore, it should be paid attention to.
9. The slider of the interchangeable product (that is, the product that the rail and the slider can match) is supplied in the manner of being mounted on the temporary shaft. For this reason; when combined with the guide rail; please pay attention.
10, if the private line to open the various parts; it will lead to the entry of dust or reduce the accuracy of the combination of parts; for this; if not a last resort; please do not easily open.
Recommend to friends comments close window
| Bearing related knowledge |
| The oscillation of the bearing and the viewing of the temperature of the bearing are different from those of the normal bearing. The characteristics of the roller bearing in the professional use of the reducer are widely used in the bearing assembly and disassembly. How to properly select the clearance of the rolling bearing |
This article links to http://
Please indicate the bearing network http://
Previous:The appearance of imported bearings-SKF bearings view the next section: the diagnosis of the bearing
Washing Machine Floor Drain,Washing Machine Cover Drain,Square Washing Machine Floor Drain,Washing Machine Stainless Steel Floor Drain
Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jmpowerdrain.com