| Home>Bearing knowledge>Analysis of the smooth method of selecting imported bearings |
Analysis of the smooth method of selecting imported bearings
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Grease smooth, usually the rolling bearing is smooth with grease. Its strengths are mainly:
Depicting very simple smooth grease can have a large sealing effect. Low maintenance cost; long service life under normal working and environmental conditions; grease can complete “life-smoothâ€. Under high load conditions (speed, temperature, load); It is necessary to replace the smooth grease regularly. In order to replace the smooth grease; it is necessary to set up the pipeline for supplying and sweeping smooth grease and collect the used smooth grease collector. For the short-cycle replacement of smooth grease; the necessary write smooth grease should be set. Pumps and valves.
The oil is smooth. When the mechanical parts adjacent to the bearing are now oil-smooth or may need to be cooled by smooth oil; the bearing should be oil smooth. When the bearing is under heavy load or high speed; or when external heat is introduced; .
Use a micro-smooth method; for example, smooth drip; smooth oil mist or smooth oil and gas; ensure that the oil loss and bearing friction are small.
When using air as a carrier; it can be directly supplied with oil and the airflow helps to seal.
The bearing speed is extremely high and the demand is outstanding to cool the suburbs locally; many smooth oils can be sprayed directly onto all contact surfaces.
Recommend to friends comments close window
| Bearing related knowledge |
| Talking about: the smooth method of rolling mill bearings The common method of distinguishing automobile bearings is to adjust the radial clearance of KOYO bearings. The common terms and definitions of bearing rolling bearings are four. scale |
This article links to http://
Please indicate the bearing network http://
Previous:The clearance of INA imported bearings mounted on the shaft or the sleeve is as follows: The TIMKEN bearing scale needs attention
LED to shoot the light, English name is LED spotlights, it is the most popular energy conservation and environmental protection products, with more and more of lamps and lanterns made of LED as light source, one of the most acclaimed is LED to shoot the light, as compared with other LED lamps, LED lamp price is lower.LED lamp is mainly used for decoration, commercial space, lighting and building lighting, etc., with the development and progress of LED technology, the market of LED lamp performance advantage is very outstanding, high purity aluminum reflector, the beam is the most accurate and reflective effect is best;Symmetrical light distribution systems such as narrow Angle, wide Angle and asymmetric etc., and the projector lamp is equipped with a scale plate, people can adjust the radiation Angle conveniently according to the scale.In addition, in order to facilitate maintenance, the LED projector lamp is replaced by a back-up switch.The lighting decoration effect is first-rate, and the LED projection lamp can realize the dynamic effects of gradual change, jumping, color flashing, random flashing, gradual change, chase and scanning.
1. LED spotlights can be driven by low-voltage direct current: it has the advantages of small load and weak interference, and has low requirements on the use environment.2. LED spotlights can control the composition of the luminous spectrum well, so that they can be well used for local or key lighting in museums and exhibition halls.
3. The luminous directivity of LED spotlights is very strong: the luminance attenuation is much lower than that of traditional light sources, and the price of LED spotlights is fairly civilian.
4. The response time of LED spotlights is very fast: at the microsecond level, as long as the switch is on, it will be on immediately without any delay or flicker.
5. The light energy concentration of LED spotlights is very high: it is concentrated in a small wavelength window with high purity.
6. The service life is very long, generally between 50,000 and 100,000 hours, because LED is a semiconductor device, and even frequent switching will not affect the service life.
7. Good environmental protection, LED to shoot the light in the process of production don't add "mercury", also do not need air, do not need glass shell, good impact resistance, good shock resistance, invulnerability to breakage and facilitate transportation, very green, known as "green energy", the LED lamp price.
8. Energy saving, the spectrum of LED spotlights is almost all concentrated in the visible light frequency band, and its luminous efficiency can reach 80 ~ 90%.It is generally believed that the energy-saving of energy-saving lamps 4/5 is a great innovation, but LED spotlights are more than 1/2 energy efficient than energy-saving lamps, which is a greater reform of solid light sources.
Led Spot Light Series,Led Track Spot Light,Mini Led Spot Light,Led Spot Light
Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com