Drainage is the fluorine plastic centrifugal pump often encountered a failure, then when faced with such a failure, we know where the reason? And how to deal with? The following is about the fluorine plastic centrifugal pump The reason of not draining and handling method introduction. Fluoroplastic centrifugal pump does not drain the reasons and solutions (1) insufficient pump (or the pump is not discharged). In such cases, you can take the re-irrigation of the treatment. (2) The pump is not turning properly. Approach is to check the direction of rotation. (3) pump speed is too low. Can be used to check the speed, speed increase processing methods. (4) filter plug, the valve is not working. When faced with this reason, you need to check the filter to eliminate debris. (5) suction height is too high, or vacuum suction tank. Approach is to reduce the suction height; check the suction tank pressure. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)
Centrifugal Glass Wool Board
Yu Ou Nuo centrifugal glass wool is a filamentary material made of molten glass by centrifugal blowing process to fiberize and spray thermosetting resin, and then through thermal curing and deep processing, it can be made into a series of products with multiple uses. Centrifugal glass wool has fluffy and intertwined fibers with a large number of tiny pores. Centrifugal glass wool has fluffy and intertwined fibers with a large number of tiny pores. Centrifugal glass wool can be made into wallboard, ceiling, space absorber, etc., which can absorb a lot of sound energy in the room, decrease reverberation time and reduce indoor noise.
Glass Wool Insulation Board,Centrifugal Glass Wool,Glass Wool Sound Insulation Board
Zhengzhou Ou Nuo Building Materials Co., Ltd. , https://www.yuounuo.com
