The biggest difference between halogen bulbs and other incandescent lamps is that the glass envelope structure of the halogen lamp is filled with some halogen gas (usually iodine or bromine). The working principle is: when the filament is heated, the tungsten atoms are evaporated. Moving toward the wall of the glass tube, when approaching the wall of the glass tube, the tungsten vapor is cooled to about 800 ° C and combined with halogen atoms to form a tungsten halide (tungsten iodide or tungsten bromide). The tungsten halide continues to move toward the center of the glass tube and returns to the oxidized filament. Since the tungsten halide is a very unstable compound, it will be decomposed into halogen vapor and tungsten after heat, so that the tungsten is in the filament. It is deposited on top to make up for the part that is evaporated. Through this regeneration cycle, the service life of the filament is not only greatly extended (almost four times that of incandescent lamps), but also because the filament can work at higher temperatures, resulting in higher brightness, higher color temperature and Higher luminous efficiency.
The basic light-emitting principle of a tungsten halogen lamp is the same as that of an incandescent lamp, and is a heat radiation source. The difference is that the tungsten halogen lamp is filled with a special working gas, which is composed of a mixture of 95% (dibromomethane and helium) and 5% of high-purity nitrogen, which establish a tungsten halogen cycle in the bulb. The specific process is that after the tungsten in the filament is volatilized, it will move to a lower temperature, and then combine with Br to form WBr2 at the tube wall; at a higher temperature, WBr2 will decompose again, and the generated W will return to the filament. On, Br returns to the working gas, which is the process of the entire tungsten halogen cycle. Through such a tungsten halogen cycle, the tungsten on the filament does not gradually evaporate, the filament is blown due to the "hot spot" effect, and the tungsten is not blackened due to deposition on the bulb shell, and its life is greatly extended.
Wire-line core barrel is a drilling tool that retrives core from the drill pipe without lifting the drill. The complete set of drill tools includes: drill assembly, fishing tool, drill pipe, winch, picker, gripper and free clamp. It has the advantages of high drilling efficiency, high core taking rate, long bit life and low labor intensity. As the drilling deepens, the advantage becomes more obvious.
Wire-Line Core Barrels,Tw Wire-Line Core Barrels,Hq Wire-Line Core Barrels,Core Barrels For Drilling
WUXI XINZUAN GEOLOGICAL EQUIPMENT CO.,LTD. , https://www.wxsmrxz.com