Many of the owners who renovated the property for the first time did not know much about the decoration, especially in terms of pricing. For example, how would the house decoration area be calculated? In fact, no matter whether it is paving the floor or the floor or painting the walls, these must be priced according to the square. The budget of the renovation also depends on the size of the renovated area. Therefore, the calculation of the area of ​​the house during the renovation is very important. Today, Xiao Bian gave everyone access to it, how to calculate the area.
| Â Wall area calculation |
Wall decoration materials generally include paint, stone, wall tiles, wallpaper, soft packs, wall panels, and baseboards. When calculating the area, the material is different and the calculation method is different.
The area of ​​paint, wallpaper, soft pack, and wainscot is length multiplied by height, and the unit is calculated in “square metersâ€. The length of house decoration is calculated based on the net length of the main wall. Height, such as from the apex of the skirt to the floor of the floor, without a skirt, and from the interior floor (or apex of the skirt) to the lower edge of the ceiling with a ceiling of 20 cm. The area occupied by doors and windows shall be deducted, but the area of ​​the hole with a single area within 0.3 square meters and the area where the beam head meets with the wall surface shall not be deducted from the baseboard or the top corner line.
When stone and wall tiles are attached, the actual area is calculated in "square meters". The area of ​​the skirting board for house decoration and installation is calculated according to the perimeter of the interior wall and the unit is meter. The calculation of the area of ​​wall tiles does not include the non-bricked part of windows and doors.
| Â Ground area calculation |
The floor area of ​​the house is calculated based on the net area between the wall and the wall in “square metersâ€, and the area occupied by the partition walls, pillars passing through the ground, coffins, and chimneys attached to the walls is not deducted. The area of ​​stairways is calculated as "square meters" according to the actual development area, and the area occupied by staircase wells within 30cm in width is not deducted; the lengths of staircase handrails and railings can be multiplied by the total horizontal projection length (excluding the inner wall portion). The coefficient 1.15 is calculated as "extended meters."
| Â Calculation of wall top area |
The decorative materials of the ceiling (including beams) generally include paints, ceilings, vertices (decorative flowers) and lighting ceilings.
The area of ​​the ceiling construction of the house is calculated according to the net area between the wall and the wall in “square metersâ€. The area occupied by the partitions, pillars, concrete stacks and chimneys in the vicinity are not deducted. The length of the vertices is calculated by the net perimeter of the interior wall of the house in meters.
It is very important for home decoration to control the cost of main materials. The control of housing decoration costs not only the actuarial area, but also the needs of the owners and the cost of purchasing building materials. The main materials required for home decoration mainly include floor tiles and wooden floors; paints and coatings for walls, lamps, sanitary ware, cabinets, and hardware accessories such as door locks and handles. The choice of what price of building materials mainly depends on the owner’s own needs and budget for renovation costs. If the owner himself does not understand the building materials market and products, the building materials bought are often expensive, resulting in over-expenditure of renovation costs. If you simply choose a product with a low price in order to save the decoration cost, the quality is hard to guarantee. The owner can accompany the designer to purchase the main material. Of course, this designer must be reliable and cannot be the kind of rebate owner.
| Area calculation tips |
1. Get a detailed standard floor or home floor plan
At the beginning of the survey, we must get a detailed residential floor plan so that the measurement and calculation will be more accurate, these drawings are usually provided by real estate developers. The main data in the floor plan include: the dimension of the axis of each room: the size between the center lines of the load-bearing wall or column; the total size of the outer wall: it is the two dimension lines; the use area of ​​each room. Have more detailed data drawings, but also more convenient for us to calculate the area.
2. Pay attention to the detailed calculation In the calculation, the area between the wall and the wall must be deducted. For example, the ground area is calculated based on the net area between the wall and the wall in “square metersâ€, but at the same time, it should be noted that some areas are not deducted. For example, the area occupied by a stairwell with a width of 30cm or less, the area occupied by a partition wall, a column penetrating the ground, a concrete wall, a chimney attached to a wall, etc.
3, calculated according to the site measurement
The area calculation must be based on the actual decoration, again on-site measurement. If the decoration, cabinets and cabinets and other calculations, in addition to marked by group, parts or calculated by item, the rest are based on the length of the horizontal or backplane area or area of ​​calculation. These are all matters needing attention in calculating the area.
With regard to the calculation of the housing decoration area, Xiao Bian introduced it to you today. I hope everyone can use this little knowledge in the decoration! Grandma Mao said well, his own hands, full clothing! Learn how to calculate the decoration area, in the decoration will not be a black eye Oh!
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Summer decoration knowledge calculation formula
Now that you know why having the best LED Hydroponic Light is the most effective way of growing plants indoors, it is important to know what exactly you should be looking for in a model before purchasing it. Even though LED Grow Lights overall consume less power, provide more useful light, and give off less heat, there are still poor models that wouldn't give you everything that you are looking for in a set up. By taking a look at a few things, though, you'll be capable of having the best harvests ever and making sure you are saving money and able to truly enjoy the fruits of your labor.
LED Grow tube light uses the new light spectrum optimized horticulture SMD LEDs for higher yields and lower operating costs compared to standard horticultural T8 and T5 fluorescent light fixtures.Ideal lighting for Micro greens, lettuce and seedlings, the low profile light tube allows for a great utilization of growing space while reducing the cost and maintenance of LED drivers.
How to Select the Best Grow Light for your Greenhouse?
The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.
Now,adding led grow lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.
Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
as we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.
Dual Veg and Bloom for plant growth and bloom
the Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.
Increase yields and potency
using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.
Reduce your costs with energy efficiency
energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year.
Led grow light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.
Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The led grow lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.
Long lifespan
using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.
Latest Diamond Version LED Grow Light for plants,using effective full spectrum 360-870nm sunlight spectrum for plants,largely accelerate the plant growth.Compare with the previous led grow lights,Diamond LED Grow Light use high par value and high lumen ligthing for the plant growth.Solid lamp body can last for long time.It can be used to enhance the growth of different plants (medical plants, vegetables, herbs and flowers ).Widely used in hydroponic,greenhouse, indoor garden, horticulture, aeroponics.It is suitable for all plants growth.
Usage Instruction:
Extremely bright,do not look directly at the LED grow light when the light is working.
Indoor use only,not water-proof.no extra ballast is needed.
This light includes IR(infrared)LEDs which look dim/invisible,they are not faulty LEDs.
Timer controls both channels on/off together.cannot turn VEG and BLOOM channels on/off separately.
Led Hydroponics Light,Led Dual Band Light,Hydroponics Dual Band Light,Hydroponic Led Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com