Tile protection four practical magic weapons

Tiles, such as home improvement building materials, are used for most people for years, decades, or even decades. If the tiles are damaged, scratched, detached, or emptied, they will be repaired. It is better to do the protection work when you start paving in the early step, which can greatly reduce the trouble of subsequent maintenance.

Tile protection magic one: use corner bars

Benefits: both protect the tile corners and decorate the seams

The tile corner strip is a line that protects the corner of the tile (also called the corner line). It is in the form of a sheet. It is inserted into the wall during construction. The side that is exposed to the fan shape covers the corner of the tile. The color is gold. Yellow, rose gold, silver gray, stainless steel mirror color, etc., the material is generally plastic, aluminum alloy, stainless steel, PVC.

Traditional tiling corners are generally right angles, and families with children can choose thick tiles with inverted arc corners to solve safety hazards. In terms of materials, it is recommended to use stainless steel corner strips. The aluminum alloy corner strips are soft and will be deformed if they are slightly collided or squeezed during construction.

In addition to protecting the tile corners, the corner strips can beautify and mask the tile defects. For example, some tiles have irregular cross-sections, and the corner joints are difficult to seam perfectly, and the corner strips can be covered.

Tile protection four practical magic weapons

Tile protection magic 2: caulk

Benefits: high stain resistance, enhanced bathroom mildew

Floor tiles are generally not prone to mold and dirt. Most of the tiles are dirty because the cracks in the tiles are moldy or dusty. The traditional tile construction uses cement, kelicon to replace the sealant or even no caulking agent. In fact, as long as the tile construction You can prevent this problem by using a good caulking agent.

The most appropriate time for the caulking agent is 48 hours after the tile is attached. Before the construction, the gravel of the brick joint is removed. The construction environment should be kept ventilated and dehumidified. The materials used should be evenly mixed during the construction, and the pigment should be pressed like the soil. Fill in the gap and then clear the remaining surface of the brick. The grout can also be used to fill gaps that have been peeled off, but the color may be slightly uneven.

The quality of the caulking agent is very important for the use effect. At present, the caulking agent on the market includes cement, silica gel, cement and latex, epoxy resin, etc. Most of the caulking agents should be added with latex to improve the wear resistance and viscosity. And elasticity.

Tile protection magic three: waxing

Benefits: Improve water and stain resistance, keep bright, and prolong service life

[Follow the WeChat public number " Jiuzheng Ceramics Network" ; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzheng ceramics network exchange group: 80123558 】

Mass Flow Meter Batch Controller

Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter Batch Controller, Batch Controller, Controller, Register & Counter.



A Main functions and features

1. Electronic control and showing filling amount & total automatically; 2. Mass and volume modes are available;
3. Amount/ Total preset function (if with control valve);
4. Data can be saved & re-displayed after power failure;

5. The last 2000 transactions can be saved;
6. Shift total and Inventory total can be calculated;
7. Error code will be shown when fault happens;
8. Over-low protect function;
9. Temperature compensation function;
10. Reasonable structure, easy for maintenance;
11. IC card system & GPRS communication (Optional).

B Main technical data

8-8-6 digit display: 8-digit for amount, 8 for total and 6 for price Environmental temperature: -35oC ~ +55oC
Relative humidity: 30%~90%
Atmospheric pressure: 86kPa~106kPa

Working voltage: 24VDC ± 1V or 220VAV ± 10% Power: 20W
Ex-mark: Ex d e ib IIB T4 Gb
Certificate No.: CCRI 19.1012



Mass Flow Meter Batch Controller, Batch Controller, Controller, Register, Counter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com