| Home>Bearing knowledge>The sound of the abnormal sound after the transmission is geared |
The abnormal sound of the transmission after the transmission is in gear
Source: China Bearing Network Time: 2013-06-30
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
First, the appearance of the sound. The transmission rang after the gear was hung up; it is because the gears that mesh with each other have the consensus effect of the impact and the cavity of the transmission housing during operation.
Second, the cause of the sound. 1) The transmission housing is damaged; the transmission housing and the bearing housing hole are worn and deformed for a long time. This sound is loudest when it is hung in the low speed; followed by the high speed; the sound is gradually decreased; the direct gear is the smallest.
.2) because a single gear face is broken; forming a collision during the engagement process. When the gear is engaged; a severe impact and oscillation will occur; then the consensus of the transmission housing is caused.
.3) The transmission device is not properly; the gear or needle bearing and bushing of a certain gear position of the transmission are not properly replaced; the gap of the device is not normal; the gear is not properly meshed and the abnormal sound is generated when the gear is in transmission.
.4) The transmission system (clutch, drive shaft) outside the transmission is in poor technical condition; then in use; attack and oscillation; causing the transmission to resonate; exhibiting resonant noise. This noise is often irregular; Occasionally occurs in a certain speed range.
.5) noise caused by other elements in the transmission; such as noise caused by many factors such as the logarithm of the working gear, the rotational speed, the operating standard, the load, and the low lubricating oil; some noise can be removed by not crashing when viewed Some can not be removed; only crash repair; and only after each part is satisfied with the skill requirements; only complete cleaning; especially when replacing gears should be replaced in pairs; ensure that the gears have excellent meshing. Pay close attention to the gaps in each part; make it comply with the regulations.
Recommend to friends comments close window
| Bearing related knowledge |
| SKF bearing application considerations The impact of the radial clearance of the oscillating screen bearing on the oscillating screen is common. The pain is abnormal. The bearing is abnormal. The protection of the NSK bearing on the pump: the reason for the damage of the imported bearing |
This article links to http://
Please indicate the bearing network http://
Previous:The device method of cylindrical bore bearing Next:The skill function of joint bearing
Ball Valve ,Steel Ball Valve,Stainless Steel Ball Valve,1 Inch Ball Valve
Zhejiang Chenxiang import and export trade Co., Ltd , https://www.chenxiang-valve.com