Construction hardware product quality analysis and dual standard publicizing conference held

Recently, the reporter learned from the China National Hardware Association that the results of the 2010 survey of water faucets and the "temperature control mixing valve for solar water heaters" and "induction temperature control nozzle" standards have been held in Foshan recently.

It is reported that the purpose of the meeting is to discuss how to fundamentally improve the quality of products and to raise the level of industry standardization among industry and enterprises so as to lay a solid foundation for further transformation and upgrading. A total of more than 40 companies from the sanitary and related solar water heater industry participated. Chairman of the China Hardware Products Association Zhang Dongli, Deputy Secretary-General and Chairman of the Construction Hardware Branch Lu Qiying, Deputy Secretary-General of the Association Liu Runfeng, Director of National Ceramics and Plumbing Sanitary Products Quality Supervision and Inspection Center Li Xuhui, Secretary General of the Building Hardware Division Tao Peizhen, Shanghai Quality Supervision and Inspection Technology Xie Mingji, director of the Institute of Building Materials, attended the meeting.

It is understood that in order to actively cooperate with and implement the "Twelfth Five-Year Plan" of the hardware industry, the spirit of instruction on the implementation of energy-saving, water-saving work and standards shall be implemented. On April 27, 2010, the results of the investigation of the Shuizui quality and the “Temperature Control Mixing Valves for Solar Water Heaters” and “Induction Temperature Control Tap” standards were held at the National Ceramic and Plumbing Sanitary Products Quality Supervision and Inspection Center in Foshan City, Guangdong Province. Held.

At the meeting, Xie Mingji made a detailed analysis of the “China Metal Products Association 2010 survey of water spouts, showers, and hoses”. The survey collected a total of 116 batches of products from 55 companies, with an overall qualification rate of 87.9%.

It is reported that so far, the survey of architectural hardware quality has been conducted continuously for more than 10 years. From the initial qualification rate of less than 50% to today's nearly 90% compliance, the quality of products and the level of the industry have been greatly improved. Can not be separated from the continuous guidance of the industry and associations, but also inseparable from the company's gradual improvement in understanding of quality work, indicating that after many unremitting efforts, construction hardware quality work has been effective.

The meeting also conducted serious and in-depth analysis and discussion on the prominent problems in the quality aspects found in the quality survey and improvement measures, and held special technical lectures. Shen Weiying, Technical Consultant of the National Hardware Products Standards Committee Building Hardware Sub-committee The presidents of the Plumbing Sanitary Ware and Valve Special Committee and the Chairman of Ningbo Ameike Copper Valve Co., Ltd. Shen Guoqiang respectively gave speeches entitled “Equipment Technology for Sanitary Ware” and “Analysis of Pipe Thread Precision and Processing Technology”. The two experts respectively In the production of sanitary ware products in electroplating, finishing, etc., the problems that may be encountered in actual operation are explained in detail, and the most advanced technologies and techniques in the industry are introduced. With strong practicality, modern and targeted content, it was warmly welcomed by the companies present.

In addition, “Temperature Control Mixing Valves for Solar Water Heaters” and “Induction Temperature Control Taps” are two standards released by the construction hardware industry in April last year. They were implemented on October 1 of that year, and the announcement was made to the industry. Relevant units and enterprises conduct unified promotion and implementation. The National Hardware Standardization Committee Construction Hardware Sub-Technical Committee Lou Yaode introduced the basic conditions and some technical parameters of the two standards of “temperature control mixing valve for solar water heater” and “induction temperature control nozzle”, and expressed the double The standards refer to some of the current advanced standards in European and American markets, and provide temperature stability, temperature safety, and protection against electric shock and power failure for temperature-controlled water nozzles; and temperature-controlled mixing valves for solar water heaters. Hot water supply pressure, temperature, and cold Hot water supply special requirements and other aspects have made new requirements. The implementation of the new standards has created conditions for further healthy and rapid development of the industry. In addition to the standards, Lin Huafu, Deputy Director of the Quality Supervision and Inspection Center of the National Ceramics and Plumbing Sanitary Products Center, also briefed the conference on some laws and regulations related to the industry, including the Quality Law, Standardization Law, and Metrology Law. , "Product Labeling Regulations" and other content directly related to the hardware products were extracted and briefed, providing legal basis for companies to conduct safe and law-abiding production and operation activities on the premise of complying with national laws and regulations.

The rich content of the conference made the representatives of the companies here excited. Everyone spoke enthusiastically and discussed the quality, standards, and professional technologies. They actively raised questions to the experts and scholars present, and the experts answered questions on the spot. The meeting atmosphere was very enthusiastic.

Zhang Dongli said that the content of this conference is substantial, and it is technically and professionally strong. It has played an active role in further improving quality awareness, strengthening quality control, and deepening standardization work. He also pointed out that innovation is the eternal theme of the development of the industry, quality is the basis and guarantee for innovation, and hopes that the hardware industry will further focus on the "five transformations" proposed in the 12th Five-Year Plan, and will continue to improve product quality. We will follow the development path of high standards, high quality, and high efficiency. We will implement the strategy of quality industry development, technology innovation strategy, standard strategy, intellectual property strategy, brand strategy, and balanced development strategy for international and domestic markets. It is hoped that the industry will further emphasize the improvement of technological innovations, processes, equipment, and materials, attach importance to the training of talents, promote the integration of industrialization and informationization, increase the level of technology, increase labor productivity, and achieve better and faster development for the industry, realizing a major manufacturing country from hardware. To work hard to make a strong country.

After the meeting, the delegates visited Heshan Hante Technology Development Co., Ltd., which specializes in the research and development and production of the core components of the bathroom faucet--precision ceramic valve core products and patented thermostatic regulating valves with international advanced level. The solar industry specified accessory products can realize annual production of solar water heaters, electric water heaters and general-purpose temperature control valve more than 300,000 sets and production and sales of more than 20 million precision ceramic valve core products. The company's production of "Top" brand temperature control valve, "Hantek" brand precision ceramic valve core because of its specialized products and the application of new technologies and new processes in the industry considerable influence.