User changquan001 Reply:
For this problem, the general treatment is to use white cement to wipe the seams, but I often change it during construction. How can I not say it? There is nothing wrong with the white wall, but for the floor tiles I usually use black cement to wipe the seams, because I originally used white cement to wipe the joints, but it was dark for a short time. In the future, I explained this issue to the construction unit and they generally accepted it. It!
User ddbead reply:
I also had similar questions not long ago, so I can answer all of you's opinions - it is best to use joint sealants, but usually use white cement and 107 glue. If white cement does not use glue, it will It is easy to drop. However, the white cement added is not easy to dry, my decoration company told me that it may take 1 or 2 months to dry (my white cement plus glue is not half a month now, but I don't see dry.) .
The white cement that I added afterwards was still missing after the first flush of my bathtub. I suspect that the decoration company didn't add enough or did not mix well (because they said that the white cement and glue were not easy to mix evenly, and there was no mixing Those glues are easy to fall off.) I asked them to make up for it with grout. They agreed, but they said that the grout is not over-insurable, and it is easy to fall off when it encounters water.
At this point I was confused, I do not know what to do in the end, you can discuss this issue with your decoration company. If white cement is used, it is recommended that you supervise their stirring. Be sure to mix well. When wiping, be careful.
Tile Lay Up Decoration Materials Knowledge Entrance Decoration Cement Decoration Find Decoration Company okay
Round Rod,stainless steel round rod,fiberglass round rod,round metal rod
Jiangsu Minglu Stainless steel Co.,ltd , https://www.jsminglubolt.com