The photovoltaic industry has always been vying for two technical routes of single polycrystalline, which has become the main battlefield for major PV giants to compete for market share and competition technology. During the SNEC Photovoltaic Exhibition held recently, many senior executives of traditional polycrystalline leading companies have revealed to reporters the trend of increasing the single crystal product line or developing new single crystal technology. However, they are also very vocal about the fact that the front runners plan to be single-crystal. "At present, our products are still dominated by polycrystalline, accounting for more than 70%, but in the future, new bases will be dominated by single crystals." Liu Zengsheng, technical director of Dongfang Risheng, told the Shanghai Securities Journal reporter yesterday that the single crystal is highly efficient and more suitable for front runners. The requirements of the plan and the room for efficiency improvement are also greater. In his view, the domestic market single crystal accounted for almost 30% last year, but this year may reach 40% or even 50%. Liu Zengsheng said that the popularity of domestic single crystals in recent years is still related to the front runner program. In 2015, when the first batch of front-runners were planned, only 20% of the polycrystalline products in the market were able to meet the standards, while 90% of the single-crystal products were able to meet the standards. In contrast, the latter two groups of runners plan to be more balanced when they are formulated. “The value and significance of the front runner program is much ahead of the time when China is moving to parity. However, some customers prefer to use polycrystalline because the initial investment is lower. In particular, some PV modules are not subject to area restrictions. The project is more inclined to polycrystalline, which is particularly obvious in foreign countries." Liu Zengsheng said. Li Gang, general manager of Jiangsu Sialfo Photovoltaic Systems Co., Ltd., which is mainly in overseas markets and mainly based on polycrystalline products, said that the demand for domestic monocrystalline modules has been strong in the past two years, which has a lot to do with the leader plan, because if It is not an efficient product and will not be installed. "It is not very important to discuss single crystal and polycrystalline now. Both products need to look at the application, look at the preferences, and look at the installation environment and project characteristics." Jing Jing, vice president of Jingke Energy, told reporters that the diamond line Cutting makes the cost of single crystal drop drastically, and the market chooses single crystal; black silicon technology or other technologies drive the cost of polycrystalline to decrease faster, and the polycrystalline advantage will be highlighted. Jingke's single polycrystalline products are available. There are two sets of specialized R&D teams in the single polycrystal. The two teams compete with each other and gradually blur the difference between single polycrystals. “From a global perspective, the demand preference for single polycrystals varies from region to region. At present, many foreign markets still prefer polycrystalline, while domestic single crystal demand is relatively high. Only a relatively wide production line, single polycrystalline simultaneous transmission In order to meet the needs of different markets, Qian Jing said that polycrystalline components have always been the main products of Jingke, and will not be easily abandoned. The company's new five or six new products are based on single crystal. The leading polysilicon wafer company, Poly GCL, is also actively promoting the development of single crystal technology. According to the company's CEO Zhu Zhanjun, from the perspective of photovoltaic raw materials, the company's FBR (circulating fluidized bed granular silicon technology) technology, including CCz continuous straight-drawing single crystal technology, is progressing in an orderly manner, in the first half of this year. Achieved phased results. “We have always believed that the future of the photovoltaic industry depends on technological advancement and technological innovation. If there is no new technology in the future investment of any industry, or a technology with lower cost and higher conversion efficiency, it is a risky investment. GCL-Poly has mastered a number of advanced technologies through mergers and acquisitions and independent research and development. The new polysilicon base in Xinjiang will be put into trial production before the end of June this year. In the field of monocrystalline silicon wafers, we use CCz continuous straight-drawing single crystal technology project. It is progressing steadily." Zhu Zhanjun said.
Mirror ACM Panel Features
Mirror aluminum composite panels are well known for their features such as excellent fireproof properties, sound insulation, strength & durability, surface flatness and smoothness. Along with these features the most important one that the mirror panel covers is that of being weather resistant as results indicate that mirror panels can withstand the harshest of weather for decades.
Mirror coated aluminum composite panels have been in high demand over the last few years; this is because of the fact that mirror coated panels present quite diverse options with consistent features. The most common applications of Mirror ACP panels would be the usage in wall boards & ceilings, adored in kitchens & balconies, shop face decorations, interior and external wall claddings. One of the biggest advantages of mirror acm panels is the fact that they are environment friendly and presents us with the opportunity to enjoy the mirror styled flair plus excellent features which make us trust the product.
The Process of Making Mirror ACP Panel
The process of making mirror ACP panel is a manufacturing process that repeatedly using sandpaper to scrape the aluminum plate, the process is divided into three parts: degrease,sand mill and wash. During the manufacturing process of mirror ACP, the special leather membrane technology after anodes are treated can made the surface of the aluminum plate to produce a layer of leather which contains the metal component. After that, every tiny thread on the surface can be clearly seen, and the metal surface will glow compactly slender luster. More and more metal shells of the aluminum plate products are made of metal drawing crafts, in order to have a beautiful and anti – erosion effect. One of the reasons why the technology is so popular is making products both fashionable and technical.
Applications of Mirror ACP Cladding
1) Constructional exterior curtain walls, Wall Panel are widely used in exhibition, stores, offices, banks, hotels, restaurants and apartments;
2) Decorative renovation for storey-added old buildings, facades, roofing;
3) Indoors decoration for interior walls, ceilings, bathrooms, kitchens, balconies and subway;
4) Advertisement board, display platforms, billboards and signboards;
5) Wallboard and ceilings for tunnels;
6) Raw materials in industrial purpose;
7) Material used for vehicle bodies, yachts and boat
Mirror ACP Panel Specification
Aluminum skin thickness: 0.3mm
Total panel thickness: 2mm-6mm
Width:1220mm(regular),1250mm,1300mm,1500mm,1550mm, 1575mm(maximum)
Length:Up to 6500mm
Standard size:1220mm(Width) ×2440mm(Length)
Non-standard sizes are available depending on customers`offers
CMD Mirror ACP Panel
CMD acp panel manufacturer offer series of Mirror Aluminum Composite Panel, which is made by proficient experts using the quality permitted material and advanced technique. This product is available in many specifications that meet on customers demand. Apart from this, this product is checked by quality inspectors in order to provide fault-free range to the customers.
MIRROR ALUMINIUM COMPOSITE PANEL
Mirror coated aluminum composite panels,Mirror ACM Panel,Mirror ACP,Mirror aluminum composite panels,aluminum composite panel acp sheet
CMD , https://www.decoratepanel.com
