When the mud and wood stage is completed, the paint painting process is then required. Latex paint is our most common paint product. What is the construction process of latex paint ? Today, we will learn about the construction process of latex paint through the following contents.
Latex paint construction process - primary treatment
Before the construction of latex paint, the top layer of the wall surface needs to be handled well. The dust and dross existing on the surface need to be cleaned with a blade. If the construction area is stained with oil, you need to use clean water and detergent to mix and rinse, and then dry naturally, until it is completely dry, use a brush to clean the dust that is present. Then, according to a certain proportion, the water and the interface agent are diluted and rolled with a brush, and then the plaster is used to repair the uneven surface of the wall. When the plaster is completely dry, kraft paper is applied to some of the local construction areas to prevent cracking of the top surface of the wall.
Latex paint construction process - putty
Prior to the construction of the putty, the prepared 801 glue and cooked rubber powder must be prepared with a certain proportion of putty. If the construction requires the use of white latex, some of them may be added. The first time the putty is scraped, most of them are scraped with a rubber-coated scraper. During the construction process, the scraping shall be done horizontally, and the scraping layer shall be even and even with neat corners. After scraping the putty, it is necessary to dry it and dry it. After polishing with sandpaper, it should be cleaned with a broom. The second time putty construction, scraping layer as thin as possible, the ground floor base without scratches, after the scraping putty, but also for grinding, to facilitate the construction of the later period.
Latex paint construction process - latex paint
The application of latex paint is generally started from the top of the house, and then the wall is painted. Before the construction, the construction area should be free of dust. The first step is to apply a primer to the brush, so that no brushing phenomenon can occur. Every place must be brushed. After the primer is dry, the latex topcoat is applied again. Before use, it is necessary to stir the paint, add some water to dilute it, and make sure the paint is more even. In addition to using the newly purchased roller, it is necessary to clean up the hair on the product and then apply the roller coating of the finish. If spraying is used, the paint must be completely dried after the paint has been sprayed once, so that the second spray coating can be performed. The position of the switch socket needs to be protected to avoid contamination.
Latex paint construction process - maintenance
The latex paint is basically finished on this side, and finally it needs to be maintained. In general, after five hours of construction, the paint surface will completely dry out. In fact, the applied lacquer layer has not yet reached the corresponding standard hardness. At this time, the top surface of the wall needs to be maintained to avoid touching and cleaning the top surface of the wall within one week or even ten days after the construction.
With regard to the construction process of latex paint , Xiao Bian will introduce it here for the time being. I hope to help you. If you want to know more about the construction of latex paint, you can pay attention to the information on this site, and more exciting content waiting for you.
Latex paint latex paint construction process
Elevator Cabin Modernization, Elevator Cab Modernization, Elevator Car Modernization
It is common for an elevator's mechanical systems to still be in good shape while the car interior is worn and outdated. Our car modernizations bring the interior up to date with a range of modern and durable design options and accessories.
Elevator Cabin Modernization |Replacement
Replacement of an existing cabin with a new one. Choice can be made from the complete wide range of CEP cabins.
Elevator Cabin Modernization, Elevator Cab Modernization, Elevator Car Modernization
CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatordoorsystem.com