Central Control Wisdom: How to maintain the station security inspection machine

Security inspection equipment is now widely used and is used in various industries. If the life of the security inspection machine is longer, the main thing is the subsequent maintenance and maintenance of the user. If the maintenance of the security inspection equipment is done well, the machine will not malfunction There will be big problems. So how to maintain the station security inspection machine? Mainly do the following.

1. Keep the environment dry and not humid: Why keep the environment dry? Professionals know that electronic products are susceptible to moisture and are prone to short circuits after being exposed to moisture. The security inspection machine is made of electronic products, circuit boards, etc. The main components of which are organic electricity, electronics, and optics. If, after being damp due to the influence of the humid environment, the light ones cause circuit parameter changes or the mechanical components are not functioning effectively, the heavy ones will cause mildew short-circuiting of the electrical components after being damp and burn out the machine components, or will cause electric shock due to the decrease in insulation strength . Therefore, the requirements of the security inspection machine on the environment are very important. Moisture-proof measures must be taken to keep the environment dry and do not let the equipment get wet. Only in this way can the normal operation of the machine be ensured and the service life of the machine be prolonged. Moisture resistance is one of the safety measures and must be highly valued.

2. The external cleaning of the equipment: because this equipment is used to detect passengers' luggage, the machine is placed in a public place. It will inevitably be dusty after a long time. When scrubbing the machine, you should also pay attention to it. If you use a wet towel to scrub The equipment should be measured with no or less water, and the machine should not be wiped with a damp cloth. Use a dry towel to wipe off the dust. If the machine is too dirty, the towel should not be too wet when scrubbing. Wring the towel to wipe it, otherwise The water of the towel will flow into the security inspection machine to make the machine damp, which will affect the normal operation and service life of the machine.

3. Internal cleaning of the equipment: not only moisture-proof but also dust-proof. If dust intrudes into the machine, it will also cause a short circuit of the security inspection machine, so dust-proof is also an important measure to ensure the normal operation of the machine. Don't underestimate the consequences caused by dust, dust will make some electrical components poor contact, and can also form a circuit short circuit, affecting the normal operation of the machine, or even burn the machine. When cleaning the external dust, it is recommended to use a vacuum cleaner; and the dust inside the machine is recommended to be cleaned with an electric hair dryer and a fine brush, and must not be wiped with a damp cloth. Some parts can be covered with a cloth cover to achieve a very good dustproof effect.

(4) Check the status of the security inspection machine at any time: during use, because of the service life of the equipment in the equipment and some objective reasons, there will always be some unsafe factors. You need to pay attention to check at any time to prevent accidents and prevent major incidents. happened. The usual check points are whether the bottom line is connected, whether the x-ray tube sleeve has oil leakage, whether the temperature rise of the tube head is too high, whether the machine operation is normal, whether the wire rope is broken, and whether the console knobs are misplaced, etc. . Once the abnormality is found, the power supply of the machine should be blocked immediately and corrected or replaced.

Since 1998, the founding team of Zhongkong Wisdom Technology Co., Ltd. (abbreviation: Zhongkong Wisdom) has been committed to the independent research of biometric algorithms and the commercialization of biometric SDK. Initially, it was widely used in the field of PC Security and identity authentication The continuous improvement of independent technology research and accumulation and a large number of market application inspections, the team layout gradually builds an identity certification ecosystem with hybrid biometric technology as the core, and an intelligent security ecosystem. After years of deepening work, it has laid a solid foundation for the industrialization of biometrics. Zhongkong Wisdom was formally established in 2007. Now it has become a global biometrics technology company and has many independent intellectual property rights in the industry. It has been evaluated for 6 consecutive years since 2012. For high-tech enterprises.

Currently, there are more than 3,500 employees and nearly a thousand R & D personnel in the company. There are three headquarters in Dongguan, Xiamen and Wuhan. The headquarters of Guanshen located in Tangxia, Dongguan has a modern manufacturing industrial park. Xiamen headquarters focuses on building company-wide software The R & D base and solution innovation center, the newly established third headquarters in Wuhan, will radiate the company ’s strategic layout in the Central Plains region and become an important technology and R & D center of Zhongkong Wisdom. At the same time, the intelligent video manufacturing base built in Wuhan will become the group company ’s security New starting point for the industry.