[China Aluminum Industry] Anodizing of aluminum powder is an electrochemical process that generates an aluminum oxide film through the anode reaction of an electrolyte. This oxide film is colored by the color of organic dyes and inorganic pigments. The aluminum powder is placed in a sulfuric acid electrolyte and continuously stirred to make the aluminum powder float and semi-float, contact with the anode while flowing, and remain in contact with the anode, thereby generating an easily colored oxide on the surface of the aluminum powder. Aluminum film. The anode reaction is the reaction between the initial oxygen precipitated from the anode and the aluminum atoms on the surface of the aluminum powder to synthesize alumina, and part of the alumina is instantly hydrated to form hydrated alumina. This is the formation process of the aluminum oxide film. At the same time, the aluminum oxide film can be dissolved by the sulfuric acid electrolyte, so the film forming reaction and the film-dissolving reaction occur simultaneously in the anodizing process. Therefore, appropriate conditions must be controlled to form a certain thickness of the aluminum oxide film. Hydrogen is generated in the cathode reaction, so that the formed aluminum oxide film has a porous feature, which is advantageous to the enhancement of the adsorption capacity.
The coloring of aluminum powder is a physical chemical process. The anodized aluminum powder is soaked in an organic dyeing liquid to make the surface of the aluminum oxide film adsorb an organic dye molecule, and the aluminum oxide molecule in the aluminum oxide film can be combined with an organic dye. The molecule forms a complex in the form of a covalent bond, a coordination bond, or a hydrogen bond, thereby coloring the oxide film.
Anodic oxidation In the process of forming aluminum oxide film on the surface of aluminum powder particles, there are many factors affecting the film formation, and different coloring liquids lead to different coloring effects. Therefore, factors such as electrolyte concentration, reaction time, temperature, and coloring liquid should be considered. Impact. The results show that: (1) the concentration of sulfuric acid electrolyte has a significant impact on the formation of oxide film. The sulfuric acid concentration is too low, the conductivity of the electrolyte is not strong, the film formation rate of alumina is slow, the concentration of sulfuric acid is too high, and the resulting oxide film is dissolved. The preferred experimental conditions: the concentration of sulfuric acid electrolyte should be 5-10% . (2) The anode current density is proportional to the alumina film formation rate. Since the aluminum powder contacts the anode at a certain moment, the anode current density is greater, which is more conducive to aluminum powder discharge at the anode, and the larger the anode current density, the more oxidation occurs. The looser the aluminum film, is conducive to coloring. Experiments have shown that anodic oxidation is carried out in 7% sulfuric acid electrolyte, and the general control current density is 5 A/dm 2 or more, and the voltage should not be less than 40 V. (3) In the anodizing process, only after a certain period of time can the aluminum powder be fully contacted with the anode. Experiments have shown that the oxidation time is suitable for 60-90 minutes while the oxidation temperature is maintained at 25-35°. C is appropriate. (4) Coloring on the aluminum oxide film is related to the degree of difficulty in coloring and the thickness of the oxide film and the concentration of the coloring solution. The thicker the oxide film, the easier it is to be colored; the greater the concentration of the coloring solution, the easier it is to color and the color The deeper [4]. Therefore, in the coloring process, a thicker coloring liquid is generally used. Experiments show that the concentration of the coloring liquid is adjusted according to the depth of the desired color. At the same time, the coloring liquid temperature is 50-60°C, the coloring time is 20-40 minutes, and the pH is 4.5-6.0.
Our automatic door kits include 1 motor+gear reducer, 1 belt,7 meter, 1 idle pulley, Microprocessor, 4 sets of carriage blue wheels, 2 sets of floor guides,2pcs remote control, 2 sets belt clamp mounting brackets, 1 power supply harness and cable connectors, 2 locator, Aluminum track whose length is 2.08 meter, 3 meter, or 4 meter.
We are a manufacturer of automatic door openers that are designed to provide people convenience. Automatic Door Systems` drive to provide that level of service is but one of the reasons why automatic doors are becoming more and more popular. Our Automatic Sliding Door systems are modern, space-saving and elegant.
Automatic sliding doors have many basic functions some of which include: automatic mode with full opening width and/or reduced opening width, and exit only for traffic control. The opening of automatic doors can also be adjustable to make the opening width smaller or larger. Important safety functions such as safety sensors prevent the door from shutting if persons or objects are in the detection zone. If the door leaves are inhibited when closing, they are immediately re-opened or if the door leaves are hindered when opening, they are immediately stopped by a safety automatic reversing mechanism.
Our most popular sliding automatic door. Think of this as the go-to door for everyday automation needs. All components fully tested and pre-assembled at factory for fast, trouble-free installation.
Applications: Retail, healthcare, airports, hospitality, clean rooms. Shenzhen Hongfa Automatic Door Co.,Ltd rated door is designed, test and certified to meet your environment needs. automatic slide doors for industrial, commercial, healthcare, and retail use. You will find our automatic sliding doors throughout in a wide variety of locations, including: Hospitals, Airports, Retail centers, Pharmacies, Hotels, Grocery stores, Hardware stores, Sporting goods stores, and more.
Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.
The control device of sliding automatic door contains basic function and extensional function, automatic operation / hold-open/closed/half-open to meet customer needs. Electric sliding door controller has multiple interfaces for complete access control systems for keeping your life and property more safety. Such as: safety beam photocell, electric locks, sensor etc. Its drive devices adopts European technology to integrate motor with gear box, which offers strong driving and reliable operation and increased power output , it can adapt to a large door.
Providing strength, beauty, and technology all in one package, Hongfa's line of automatic sliding doors provides entrance solutions for practically any application. An exclusive feature is Hongfa's sound-dampening track reducing operational noise to a mere whisper and stops vibration resonance that can be transferred to the building structures.
Automatic Door Kits,Automatic Sliding Door Opener,Automatic Sliding Door Operator,High Performance Automatic Door Kits
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com