What is the construction process of the lighting shed? This is what we want to figure out before installing the lighting shed. The construction process of the illuminating ceiling, what are the materials of the ceiling, let Xiaobian in the following article, let us introduce it to you. I hope that everyone will read it. After the introduction of Xiaobian, I will have some understanding of the construction process of the lighting canopy , and I hope that it will be helpful to everyone.
First, the introduction of the construction process of lighting ceiling
1. According to the drawings and the requirements of the production and installation process, all the joints of the frame are welded → full welding → vertical welding → flat welding → fillet welding → seam welding, etc. → the position of the base of the connecting piece is placed on the steel frame to determine the welding Position → Welded joint base → The position arranged according to the drawing is welded one by one.
2, steel structure frame structure anti-corrosion and derusting → on-site manual descaling or sandblasting and rust removal → welding to find compensation, if the welding knot does not meet the requirements, need to repair welding → after repair welding → start structural paint spraying → prevent Once the rust primer is once → rust-proof primer 2 degrees → top coat spray → top coat to make up the spray → finish the paint finish. Glass size stakeout → custom glass → installation glass → glass gap sealing structure waterproof glue → suitable glue → cleaning to remove glass surface debris → glass surface cleaning → engineering completion, delivery acceptance.
Second, the introduction of decorative materials for the ceiling
1. Gypsum board: Gypsum ceiling is made of plaster and gypsum as the main raw material. It has the properties of light weight, heat insulation, sound absorption, flame retardant and sawability. Generally used 600600 specifications, there are clear bones and dark bones, keel is usually aluminum or iron. The living room, bedroom, study and other areas can be used.
2, light steel keel gypsum board: gypsum board and light steel keel combined to form a light steel keel gypsum board. Light steel keel gypsum board ceiling has a variety of gypsum board, gypsum board, fiber gypsum board and hollow gypsum board. From the current point of view, the use of light steel keel gypsum board ceiling as a partition wall is more, but used to make modeling smallpox is less.
3, splint: splint (also known as plywood) has light weight, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, insulation and so on. It can also easily create a variety of modeling ceilings such as curved, round, square, but the disadvantage is that it is afraid of termites.
4, shaped long strip aluminum gusset: Nowadays, most of the home decoration is no longer using this material, mainly because it is not resistant to dirt and easy to deform. Square lacquered aluminum buckle ceiling is used in kitchens, toilets and other places that are easy to dirty and humid. It is the current mainstream product.
5, if you want to dry clothes every day, then you need to use the glass sun shed, this material sun awning has good light transmission performance, does not affect the drying of clothes. If you need to plant flowers and plants on the balcony, you can also use a glass sun shed. Xiaobian suggested that everyone buy a tempered glass sun awning, which is safer. Moreover, the purchase of some brands of glass is a multi-protection, such as CSG, Beibo, Taiwan Glass, Yaopi Glass, Yaohua Glass.
Lighting ceiling construction process. The material of the canopy, Xiaobian is introduced to you here. As long as we know something about the construction process of the lighting canopy, we can do a good job, the lighting canopy, the installation, if you want to know, more home decoration Information, please continue to pay attention to, decoration home network.
The liquid filling of the Filling Pumps only passes through the hose, does not touch the pump body, and has no valves or seals and other connecting parts. Routine maintenance only requires regular replacement of the hose, which reduces the maintenance cost of the user.
Filling Pumps, Available flow rate from 0 to 33000 ml/min,
The Filling Pumps can set the suck-back angle and speed which can reduce the liquid drip when liquid filling.
The Filling Pumps can work with a foot pedal that you can control the pump in a longer distance instead of the traditional way of the start-stop switch.
Filling Pumps,Liquid Dispensing Filling Pumps,Digital Distribution Filling Pumps,Bottle Filling Smart Dispensing Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com