For hardware manufacturers and operators, quality problems are often overlooked near the end of the year. Many business operators don't even know much about 3C certification. So, what steps do hardware tool companies need to apply for 3C certification?
1. The type test is based on the standard specified by the CCC Product Certification Center.
2. The type test is in principle sent by ZZHY to the designated CCC product certification center subcontracting laboratory, but for large, inconvenient transportation, installation and commissioning of goods, the applicant may apply for other proximity detections approved by CCIBLAC or CNACL. On-site inspection by the agency or factory. For on-site inspection, the inspection site shall meet the specified conditions, including:
1. It has the necessary instruments, equipment and venues for on-site inspection; customs declaration and inspection;
2. The accuracy and range of the instrument and equipment shall meet the relevant requirements of the on-site inspection project;
3. Relevant instruments and equipment should be regularly verified and traceable to national benchmarks or international benchmarks; customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance.
4. There are environmental conditions and grid conditions in accordance with Chinese standards for on-site inspection;
5. Have familiar with standards, operations and other personnel.
Customs declaration, on-site inspection is generally carried out by the applicant under the supervision of qualified test personnel assigned by the CCC Product Certification Center. The technicians are required to carry out the test operation as required and issue the original test record. The CCC tester is responsible for organizing and preparing the test report.
3. For the series products or variant products of the basic products that have been applied for and passed the type test, only the relevant items of different parts of the basic type are detected.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Optical Bandpass Filters are used to selectively transmit a portion of the spectrum while rejecting all other wavelengths. Optical Bandpass Filters are ideal for a variety of applications, such as fluorescence microscopy, spectroscopy, clinical chemistry, or imaging.
An optical bandpass filter has a transmission band surrounded by two blocking bands that allow only a portion of the spectrum to pass. These optical bandpass filters have broad spectral bandwidths in either the ultraviolet, visible, or infrared spectrums. The nearly black filters absorb visible radiation. They are perfect for ultraviolet or infrared detection applications. UV filters are often used to selectively transmit the 254nm and 365nm mercury lines. IR filters are often used in nightvision and IR sensing systems.
Color Separation Filter,Neutral Density Filter,Filter,Short/Long Wave Pass Filter,Bandpass Filter and Interference Filter available upon request.
Specification of our color filter as follow:
Material:Filter Glass,BK7
Dimension: 4mm-160mm - 0.20mm
Squares/Rectangles:1mm-165mm
Thickness:0.5mm-4mm
Wavelength range:190nm to 4.5um
Thickness tolerance:+/-0.01mm-0.1mm
Edges:Fine
Ground Flatness:Up to Lambda/10
Surface quantity: 80/50-20/10 Scratch/Dig
Optical Bandpass Filter,Optical Glass Bandpass Filter,Bandpass Filter Kits,Uv Bandpass Filter
China Star Optics Technology Co.,Ltd. , https://www.realpoooptics.com