In daily life, many consumers do not know much about air conditioning outlets and ordinary outlets , and often think that air conditioning outlets are the same as ordinary outlets. So what is the difference between an air-conditioning socket and an ordinary socket? Let's take a look at the difference between the air conditioning socket and the common socket today for your reference.
Difference between air conditioning socket and common socket
One, air conditioning socket1. The socket panel is equipped with a dedicated air conditioning socket, infrared receiver and power supply indicator.
2. The socket usually does not supply power (that is, "always-powered" state) and has high security.
3, when used, air conditioning host plug into the socket, then start the socket with the air conditioning remote control, panel light tube, socket began to supply power, press the air-conditioning remote control again, the air conditioning start to work.
4. After the outlet starts to supply power, if the air conditioner does not start working, the outlet power supply delays for about 180 seconds and the power is turned off automatically, and the outlet is restored to the normal state without power.
5. After the outlet starts to supply power, the air conditioner starts to work and the outlet continues to supply power. Until the air conditioner is turned off, the outlet is automatically powered off.
6. The socket is a special socket designed for air conditioning. The air conditioner does not work, and the socket will not supply power. Only when the air conditioner starts to work, the socket will continue to supply power. This solves the problem of "standby power consumption" of air conditioners and saves electricity expenses.
The air conditioner is a motor type product, and the motor product has a starting current, and the starting current can be up to 3 times the peak current. Therefore, the rated current of the air conditioning socket is greater. There are generally 16 A, 20 A, 25 A, 32 A and so on. The insertion distance of different amp sockets is different. The thickness of the common insert is 0.3mm, 30 wires. The insert thickness of the air conditioning socket is 0.6mm, 60 wires. General 16 amp sockets can be used for 2 and a half air conditioners; 20 amps for 3 air conditioners; 25 amps for 3 or more air conditioners; 32 amps for 5 or more air conditioners.
Difference between air conditioning socket and common socket
Second, ordinary socketThere are one or more circuit wiring pluggable seats, through which various wiring can be inserted to facilitate connection with other circuits. Through the connection and disconnection between the line and the copper part, the connection and disconnection of the part of the circuit are finally achieved.
1, the installation height of the socket, when the design has provisions should be installed according to design requirements; when the design is not clear, generally should be consistent: the outlet with a security door is not less than 0.3M; without a security door socket is not low and 1.8M; It is recommended that outlets with security doors be purchased as far as possible, because the prices are not much different.
2, in the bathroom or other damp places should be sealed with a good waterproof, splash socket. (Note: The socket with safety door is based on the general socket, and the plastic baffle (safety door) in front of the socket metal reed is added. The three-hole socket, when the plug is inserted, the ground pile head (slightly long) is inserted into the hole first. The mechanism inside the socket opens the other two holes, and the two holes must be inserted into the socket at the same time. The safety door can be opened to prevent the child from accidentally inserting metal objects to cause a safety accident.)
3. When installing the socket, the panel should be straight and close to the wall. And the wiring (phase) should be in accordance with: single-phase two-hole socket, the right hole facing the socket or the upper hole connecting line (FireWire); the left hole or the lower hole connecting the zero line; single-phase three-hole socket, facing the right of the socket The hole is connected to the phase line (L, FireWire), the left hole is connected to the neutral line (N), and the upper hole is grounded (PE).
The relevant information about air conditioning sockets and common sockets is introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
socket
Mechanical Water Meters,Water Flow Meter Mechanical Type,Mechanical Liquid Flow Meter,Mechanical Type Water Flow Meter
Ningbo Safewell Plumbing Co., Ltd. , https://www.safewellbrass.com