When the auxiliary furnace material passes through this gap, it is impacted between the rotating roller and the fixed knife.

By adding the shear force influencing factors to the wear pattern of the feeder, the consistency between the liner wear simulation and the measured geometry is greatly improved. The estimation of the operation limit factor for the hydraulic pressure and traction force satisfies the conditions, but

The amount of traction power and hydraulic pressure fluctuate. As mentioned earlier, there are other possible explanations for the differences in this model. For example, the particle size distribution or non-linear relationship between wear rate and pressure. Cone Feeder Size

It is well-known that it directly affects the thickness of the product at the outlet of the feeder. However, the size of the assembly gap, the effect of the discharge port on the feeder, and the thickness of the feeder, is often overlooked.

In actual production, in order to negatively prevent the increase of oil temperature, the feeder generally uses larger values ​​for the assembly gap. Especially in the actual overhaul, the related worn parts that have exceeded the wear limit are rarely replaced in time according to the gap becoming large. Thus, real

Assembly gaps are much larger than the regulations. The motor rotates the rotating shaft to drive the cutter mounted on the optional cutter shaft and the fixed cutter mounted on the wall of the crushing chamber to cut the material, and then the material continues to descend and is installed on the roller support.

There is a large active gap between the rotating roller and the pin on the frame. When the roller bracket rotates with the rotating shaft, the rotating roller rotates around the rotating shaft on the one hand, and one side of the rotation rotates around the pin shaft under the action of the centrifugal force. At this time, the rotating roller wheel is installed in the crusher.

The space between the fixed blades of the cavity is large and small. When the material passes through this space, it is impacted by the rotating roller and the stationary blade, shearing, squeezing, bending, and separating materials of different materials. And roll them separately, and then divide by scraper board

After the material is discharged replenishment furnace slag feeder feeding machine feeding machine