Look at the glass
1 See if the glass is transparent, with or without defects such as noise and bubbles.
Analysis: Imperfections in the production of glass materials or defects in the process can cause defects such as noise and bubbles in the glass, reducing the hardness and strength of the glass.
2 See if the 3c mark is certified on the original glass.
Analysis: 3c certification is the abbreviation of China's compulsory product certification, shower room products without this logo can not be sold.
3 look at the complete tempered glass fragment model
Analysis: According to the national standard, the safety of the tempered glass should reach 40 or more per 50*50mm area. 2. Look at the aluminum material.
1 look at the hardness of aluminum
Analysis: The aluminum in the shower room often needs to support the weight of dozens of kilograms or even hundreds of kilograms of glass. If the hardness and thickness are not good, the shower life will be short, and the hardness and thickness of all aluminum materials are important indicators. The thickness of the qualified shower room aluminum is above 1.2mm, and the upper glass hanging glass should be 1.5mm or more. The hardness of aluminum can be tested by hand-pressed aluminum frame. Aluminum with a hardness of 13 degrees or more is difficult for adults to deform by hand.
2 See if the surface of the aluminum is smooth, with or without chromatic aberration and trachoma, and the profile finish.
Analysis: When the used aluminum scrap is processed, the smoothness of the surface is not enough, there will be obvious chromatic aberration and trachoma, and the finish of the special section is dark.
3. Look at the pulley
1 look at the material of the pulley and the sealing of the wheel seat
Analysis: The wheel base of the pulley should use materials that are resistant to pressure and heavy, such as 304 stainless steel and high-end synthetic materials. The sealing of the wheel seat is good, the water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
2 look at the fit of the pulley and the aluminum track
Analysis: The pulley and the track should be tightly matched, the gap is small, and it is not easy to fall off when subjected to external force to avoid a safety accident.
4. See the adjustment function of the wall material and wall clamp
Analysis: The wall material (wall clamp) is the aluminum material connected to the shower room and the wall. Because the tilting of the wall and the offset of the installation can cause the glass of the wall to be twisted, the glass self-explosion occurs. Therefore, even the wall material should have the vertical and horizontal adjustment function, so that the aluminum material can be twisted with the wall and the installation to eliminate the distortion of the glass and avoid the self-explosion of the glass.
5. Look at the stability of the shower rod
Analysis: The pull rod of the shower room is an important support to ensure the stability of the frameless shower room. The hardness and strength of the tie rod are an important guarantee for the impact resistance of the shower room. It is not recommended to use a flexible lever, which is weak.
6. Look at the shower room water tightness
Analysis: The main observation area of ​​the watertightness of the shower room is
1 shower room and wall connection
2 door and door joints
3 hinges water tightness - hinges because of activities, water tightness is often bad
4 shower room and stone base, bottom basin connection
5Check the tightness of the strip and strip
7: See if product design is humanized
Brief analysis: quality rack, sealed magnetic strip, buffer device.
8: Distinguish acrylic material
At present, the plates used in the shower room are mainly acrylic plates. It is understood that the glass wires used in some composite acrylic plates contain formaldehyde, which is one of the sources of bathroom pollution. The way to distinguish the acrylic material is to look inside the shower room. If the back side of the acrylic board is different from the front side and is rough, it is a composite acrylic sheet. For example, some acrylic sheets will change color when used for too long, and some will have small cracks. This is also the main reason why some brands have expensive shower rooms, and some are cheap.
9: Automatic water storage shower room
The automatic water storage shower room is designed to store the water after shower for use in a toilet. The utility model adds a water tank under the shower room, the water tank is provided with a water inlet and a water outlet, and a water discharge switch is arranged on the water inlet and the water outlet; a water tank is arranged on the shower room, and the water tank is provided with The water outlet and the water outlet are connected to the water inlet of the toilet; a water pump is installed on the upper water tank, and the water pumping water pipe and the water outlet pipe are respectively connected to the water tank and the water tank; and the water tank can be installed in the upper and lower water tanks respectively. The float of the water level is connected to the contact switch through the float link; the contact switch is connected in series with the water pump on the circuit. The utility model can automatically turn on or off the water pump power supply according to the change of the water level of the water tank, complete the automatic water storage of the water tank, and then use the height drop to automatically provide the water source for the toilet bowl.
Led Flashlight,Led Mini Flashlight,Led Torch Flashlight,Plastic Diving Flashlight
Cangnan Younglite Electrical Co., Ltd. , https://www.younglitetec.com