According to the documents promulgated by the 11 departments of the National Development and Reform Commission on May 31, China will focus on the remanufacturing of auto parts, gearboxes, generators and other components, and expand the auto parts remanufacturing pilot to the drive shaft. Oil pump, water pump and other components. At the same time, it promotes the remanufacturing of construction machinery and machine tools and the renovation of large-scale used tires.
According to the documents of 11 departments including the Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, the Ministry of Finance, the Ministry of Environmental Protection, and the Ministry of Commerce, China will focus on improving the efficiency of resource utilization, improving the level of remanufacturing technology and expanding Remanufacturing application fields, cultivating remanufacturing demonstration enterprises, standardizing old parts recycling systems, opening up domestic and foreign markets, strengthening regulations, strengthening policy guidance, gradually forming remanufacturing operation mechanisms and management models suitable for China's national conditions, and realizing remanufacturing scale Marketization and industrialization development, strive to cultivate the remanufacturing industry into a new economic growth point, promote the formation of a large-scale circular economy, and accelerate the construction of a resource-saving and environment-friendly society.
According to the introduction of the Department of Environmental Protection of the Development and Reform Commission, remanufacturing refers to the mass production process of professionally repairing used auto parts, engineering machinery, machine tools, etc., and the remanufactured products reach the same quality and performance as the original new ones. The advanced form of economic “reuse†can save 50% of cost, 60% of energy saving, 70% of material saving, and almost no solid waste compared with manufacturing new products. Developing the remanufacturing industry is not only conducive to the formation of a circular economy model of “resources-products-waste products-remanufactured productsâ€, it can make full use of resources, protect the ecological environment, and can form new economic growth points and provide a large number of employment opportunities for the society. It is an effective way to promote the development of manufacturing and modern service industries.
China's remanufacturing industry has great potential for development In 2008, the number of car ownership in the country reached 49.57 million (excluding low-speed cars), the number of machine tools reached more than 7 million, and the number of construction machinery in 14 major models reached 2.9 million. A large number of equipment will be eliminated after reaching the scrapping requirements, and new decommissioning equipment is still increasing.
In 2005, the State Council clearly stated in the "Several Opinions on Accelerating the Development of Circular Economy" to support the development of remanufacturing, and the country's first batch of circular economy pilots will remanufacture as a key area. In 2008, the Development and Reform Commission selected 14 auto parts companies to carry out pilot projects. The Circular Economy Promotion Law, implemented in January last year, incorporated remanufacturing into the legalization track. By the end of last year, China's auto parts remanufacturing pilot has formed a remanufacturing capacity of 230,000 sets of automobile engines, gearboxes, steering gears and generators. Re-manufacturing basic theory and key technology research and development have made important breakthroughs, and the remanufacturing technology of automated nano-particle composite brush plating developed and applied has reached the international advanced level.
11 departments have proposed in the document that China will improve the remanufacturing technology level, expand the remanufacturing application field, cultivate remanufacturing demonstration enterprises, standardize the old parts recycling system, and explore domestic and foreign markets as the main tasks, through the manufacturing industry development plan, as soon as possible. Amend the "Administrative Measures for the Recycling of Scrapped Vehicles", appropriately remove the restrictions on the mandatory re-entry of the "five major assemblies" of scrapped automobiles, improve the economic policies that promote the development of the remanufacturing industry, establish a remanufacturing supervision and management system, cultivate professional talents, and increase publicity efforts. Ways to promote the accelerated development of this industry.
The development of China's remanufacturing industry is still in its infancy, and it still faces some outstanding problems. The re-manufacturing as a new concept has not been widely recognized by consumers and society; the source of remanufactured old parts and remanufactured products are not smooth enough; scrapped cars Relevant laws and regulations such as recycling management need to be revised. The relevant management systems are in urgent need of improvement and technical standards are still not perfect. Without policy incentives, the state has no corresponding tax incentives for remanufacturing, and financial support is insufficient.
According to the documents of 11 departments including the Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, the Ministry of Finance, the Ministry of Environmental Protection, and the Ministry of Commerce, China will focus on improving the efficiency of resource utilization, improving the level of remanufacturing technology and expanding Remanufacturing application fields, cultivating remanufacturing demonstration enterprises, standardizing old parts recycling systems, opening up domestic and foreign markets, strengthening regulations, strengthening policy guidance, gradually forming remanufacturing operation mechanisms and management models suitable for China's national conditions, and realizing remanufacturing scale Marketization and industrialization development, strive to cultivate the remanufacturing industry into a new economic growth point, promote the formation of a large-scale circular economy, and accelerate the construction of a resource-saving and environment-friendly society.
According to the introduction of the Department of Environmental Protection of the Development and Reform Commission, remanufacturing refers to the mass production process of professionally repairing used auto parts, engineering machinery, machine tools, etc., and the remanufactured products reach the same quality and performance as the original new ones. The advanced form of economic “reuse†can save 50% of cost, 60% of energy saving, 70% of material saving, and almost no solid waste compared with manufacturing new products. Developing the remanufacturing industry is not only conducive to the formation of a circular economy model of “resources-products-waste products-remanufactured productsâ€, it can make full use of resources, protect the ecological environment, and can form new economic growth points and provide a large number of employment opportunities for the society. It is an effective way to promote the development of manufacturing and modern service industries.
China's remanufacturing industry has great potential for development In 2008, the number of car ownership in the country reached 49.57 million (excluding low-speed cars), the number of machine tools reached more than 7 million, and the number of construction machinery in 14 major models reached 2.9 million. A large number of equipment will be eliminated after reaching the scrapping requirements, and new decommissioning equipment is still increasing.
In 2005, the State Council clearly stated in the "Several Opinions on Accelerating the Development of Circular Economy" to support the development of remanufacturing, and the country's first batch of circular economy pilots will remanufacture as a key area. In 2008, the Development and Reform Commission selected 14 auto parts companies to carry out pilot projects. The Circular Economy Promotion Law, implemented in January last year, incorporated remanufacturing into the legalization track. By the end of last year, China's auto parts remanufacturing pilot has formed a remanufacturing capacity of 230,000 sets of automobile engines, gearboxes, steering gears and generators. Re-manufacturing basic theory and key technology research and development have made important breakthroughs, and the remanufacturing technology of automated nano-particle composite brush plating developed and applied has reached the international advanced level.
11 departments have proposed in the document that China will improve the remanufacturing technology level, expand the remanufacturing application field, cultivate remanufacturing demonstration enterprises, standardize the old parts recycling system, and explore domestic and foreign markets as the main tasks, through the manufacturing industry development plan, as soon as possible. Amend the "Administrative Measures for the Recycling of Scrapped Vehicles", appropriately remove the restrictions on the mandatory re-entry of the "five major assemblies" of scrapped automobiles, improve the economic policies that promote the development of the remanufacturing industry, establish a remanufacturing supervision and management system, cultivate professional talents, and increase publicity efforts. Ways to promote the accelerated development of this industry.
The development of China's remanufacturing industry is still in its infancy, and it still faces some outstanding problems. The re-manufacturing as a new concept has not been widely recognized by consumers and society; the source of remanufactured old parts and remanufactured products are not smooth enough; scrapped cars Relevant laws and regulations such as recycling management need to be revised. The relevant management systems are in urgent need of improvement and technical standards are still not perfect. Without policy incentives, the state has no corresponding tax incentives for remanufacturing, and financial support is insufficient.
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com