I believe that many people have leaks in the bathroom. Why do leaks in the bathroom? There are two reasons. First, there is water leakage on the ground. The second is the leakage of water from the upper and lower pipes. The first judgment is good to solve the problem, the following together with the Xiaobian to understand how to handle the leakage of bathroom under the bar.
How to deal with bathroom leaks effectively, ground leakage repair
1, to determine whether the surface seepage
It is very simple to determine if there is a leak on the ground. Generally, as long as the ground does not come into contact with water, there is no leakage downstairs. Whereas there is contact with water on the ground, and seepage of water occurs downstairs, it is generally caused by water leakage from the floor. It may be due to gaps in the base surface, or it may not be waterproof.
2, toilet floor leakage water maintenance method
If you want to solve the problem of water leakage on the ground, you must first determine the location of the leak. This can be referenced according to the part of the water seepage below, and then the surface of the dust, water, oil and other clean, and the surface to maintain a certain dry environment, Can be repaired.
If the bathroom floor tile is filled with a gap sealant, use a knife to draw a small groove at the seam where the leaking occurs, and then spray some tiles, tile joints, water pipe roots, wall joints, etc. around the leaking part. Permeation type waterproofing agent, waterproofing agent must be sprayed evenly.
After the water repellent is sprayed for two hours, about 90% dry, it is necessary to re-fill the cut-out small grooves with the filler of the original tile, especially for weak positions such as water pipes, floor drains and wall joints. Brush to reinforce, or use plastic mud to make waterproof edges, and do not get water within 24 hours after repair.
How to deal with bathroom leaks effective two, water pipes up and down leak repair
1, to determine whether it is leaking water pipes
If you want to determine whether there is water leakage from the upper and lower water pipes, it is still more troublesome. First, turn off the water inlet gate in the house, then turn on all the faucets in the house. The purpose is to drain the water in the pipes, and then turn off the faucet after drying. Cannot be used within the next 6 hours, then open the flood gate, remember not to open the faucet water, to see if there is dripping water downstairs, if there is on the water pipe problem, if not, it is generally a problem with the water pipe .
2, toilet up and down water leakage repair method
It is relatively difficult to determine whether it is water leakage from the upper and lower water pipes, but it is relatively simple to confirm that it is necessary to repair it, as long as the water pipe that will seep water is removed, replaced, or repaired.
Editor's Note: The above is about two ways to deal with the effective leakage of bathroom leaks , in fact, there are many ways to deal with leaks, can be used to fill gaps with glass glue, you can also use plastic mud caulking, but the effect is a moment Only temporarily solve the problem, it is best to re-waterproof measures or replace damaged water pipes.
How to deal with bathroom leakage
CNMAX's main Steel Fittings is Butt Weld Fittings.
Products:
Butt Weld Elbow, Con. Reducer, Ecc. Reducer, Tee, Stub End, Cap
Material:
Carbon Steel: ASTM A234 WPB, WPC, ASTM A420 WPL1, WPL3, WPL6 etc
Stainless Steel: ASTM A403 WP304/304L, WP316/316/L, WP317L, WP321, WP347 & WPS31254
Alloy Steel: ASTM A234 WP1/WP12/WP11/WP22/WP5/WP7/WP9/WP91
Duplex and super duplex steel: ASTM A815 UNS S31803/S32205/S32750/S32760
Non-destructive testing: penetration test, ultrasonic test, radiographic test, any third parties inspection,
|
Carbon Steels |
Alloy Steels |
Austenitic Stainless Steels |
Duplex Steels |
Nickel Alloys |
|
ASTM A234 WPB / C |
ASTM A234 Grade WP1 |
ASTM A403 WP304 / L |
ASTM A815 UNS S31803 |
ASTM B366 WPNCMC UNS NO6625 |
|
ASTM A420 WPL6 |
ASTM A234 Grade WP5 |
ASTM A403 WP316 / L |
ASTM A815 UNS S32750 |
ASTM B366 WPNICMC UNS NO8825 |
|
|
ASTM A234 Grade WP9 |
ASTM A403 WP321 / H |
ASTM A815 UNS S32760 |
ASTM B366 WPNIC UNS NO8800 |
|
|
ASTM A234 Grade WP11 |
ASTM A403 WP347 / H |
|
ASTM B366 WPNIC UNS NO8810/11 (HT) |
|
|
ASTM A234 Grade WP22 |
|
|
|
|
|
ASTM A234 Grade WP91 |
|
|
|
Steel Fittings
Steel Fittings,Carbon Steel Fittings,Stainless Steel Tube Fittings,Stainless Fittings
Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com