The practice of leaving seams on tiles is a common process for tile construction. It is also a must for tiled tiles. However, why do some tiles not need to be left seams? For example, it is a polished tile called a seamless tile. Why doesn't the polished tile leave seams ? Is it safe to leave no seams? What are the hazards?
1. Why does the polished tile leave no seams?
Why does the polished tile leave no seams ? The polished tile is called a seamless tile because it doesn't need to leave a gap when it is applied. It's not true, but the surface effect of the polished tile makes it seamless or finely slit. The effect will be more beautiful and more neat and smooth. This is not to say that you can leave no gap at all.
As mentioned above, the polished bricks only let the tiles remain smaller when paving, and there is no gap left, so it is wrong to say what the polished bricks do not leave seams. It just looks on the surface. There is no obvious gap.
If you think that the tiles have been left in the seams, then the gaps are more likely to accumulate dust, bacteria, etc., affecting the appearance and health, and it is not easy to clean, then it would be a big mistake. When the tiles are actually paved Its technical requirements will be higher. If the construction experience is not enough, it may not be able to be laid.
Tiles need to be left in the paving, as to the width of the number, then it should be based on the characteristics of the ceramic tile itself, there is no uniform specification standards, can be married to thermal expansion and contraction factors and paving decorative effect Determine the width of the left seam, like antique brick paving, then you can leave 3-5mm gap, the normal tile laying left about 3mm gap on the line.
2. What are the hazards of leaving no seams?
a, without leaving seams easily emptying, falling off and so on
In the course of using the ceramic tile, due to the change of temperature and humidity, some swelling and bubbling phenomena will appear, and the adhesive material of the tiled tiles will also produce a force, which will result in hollowing, cracking, deformation, and edging of the tiles. And other issues.
b. It is more obvious that there will be no error when leaving no seams
There may be some subtle errors in the production process of tile self-professions, which exist in the length, straight angle and other places of the tiles. If tiles are not laid, it will make these errors more easily, and the sutures will not be straight and the wrong stage will be obvious. , uneven stitches, etc.
c, no joints are easy to appear seams are not straight
Choosing a paving without seams requires a very high level of skill. The average decorator is very prone to errors, which leads to tile joints that are not even, which in turn affects the overall effect.
d, no waste is more waste material
Tiles can be adjusted to adjust the spacing of bricks. It is also possible to use whole bricks for special corners.
Editor's Note: The above is about the reason why the polished tiles do not leave seams and there is no harm in leaving the seams. In general, there is a lot of danger in the tile construction without seams, so no matter what kind of tiles will leave a certain gap I hope the sharing of Xiaobian can solve everyone's doubts.
Metal Coil Stock,Hindalco Series Aluminium Coil,Series Aluminum Coil Distributors,Series Aluminum Coil Distributors
Jinan Xinhai Aluminum Industry Co., LTD. , https://www.jnxinhai-alu.com