What are the advantages of Hawk Smart Lock? What new technology does the Mobike Bike Hawk Smart Lock have? Mobike’s change of bicycles in each generation will lead to industry attention. The classic version of the first generation, the second-generation Lite lightweight version, the third-generation wind light to the latest release of the fourth generation. Each upgrade is more in line with the needs of the public and the user experience is better. Along with the upgraded bicycle locks, combined with electronic technology, Mobi’s fourth-generation bicycle launched a smart lock code-named Hawk. What exactly does it do?
The fourth-generation Mobike bicycles include large-scale versions, which are NEW lite and NEW lite speed-changing versions. The ride experience is better, and it is more labor-saving. It also supports bicycle speed change, and is more stylish in design. The entire vehicle weighs only 15.5kg. . Lighter and more convenient.
For the fourth-generation version, Mobai will release a new lock. This means that the new bike will carry the new smart lock code named Hawk. This model of smart lock has more obvious advantages than its predecessor products, as follows:
1. Higher unlocking success rate. We all know that both Mobike and OFO often experience unlock failure during the peak period of car use. There is no guarantee of success rate, especially for older bicycles, with a combination lock or Bluetooth lock, when the user is in use, It is often impossible to open the lock normally, which greatly affects the user experience. The new Hawk smart lock increases the success rate and makes unlocking easier.
2. Thin and durable. Code-named Hawk, the smart lock is smaller and more easily integrated into a bicycle. It can be connected to various types of modules, and introduces a wealth of functions to make the bicycle more powerful. At the same time, it is also conducive to the appearance of the design. The lock will change the image of the past and is more suitable for light weight. Design concept. Thanks to the new technology, the new generation of car locks are also more durable and consumes less power, which can extend the battery life to a greater extent and extend the service life of the car lock. It can effectively reduce the cost of car lock management and reduce the failure rate of bicycles. Experience is also an improvement in another aspect.
3. More accurate positioning. The new Mobike Bike Hawk smart lock has been greatly improved in solving the problem of inaccurate positioning, supporting "Beidou + GPS" multi-mode satellite positioning, support for global multi-mode mobile network and Internet of things, seamless access to major operations Business network, compatible with a variety of network formats. The network connection is more stable, and the positioning of bicycles is also more accurate. This can effectively prevent problems such as vehicle loss, greatly facilitating user appointments and high-precision positioning.
The above information is compiled by the smart lock China Net Mobike Hawk intelligent lock related information, more car lock knowledge, please pay attention to this site!
PCD Ball Nose End Mills means that the main deflection angle varies continuously from 0 to 90 degrees, depending on the depth of cut. The cutting edge of this insert is very strong, because the chips generated in the direction of the long cutting edge are relatively thin, so it is suitable for a large feed amount, the direction of the cutting force along the radial direction of the insert is constantly changing, and the pressure generated during the processing. Will depend on the depth of cut. The development of the geometric geometry of the modern blade makes the circular blade have the advantages of smooth cutting effect, low power requirement for the machine tool and good stability. Today, it is no longer an effective roughing cutter, and it has a wide range of applications in face milling and end milling.
PCD Ball nose end mills are used for a wide range of applications such as shoulder milling, slotting and contoured surface milling. Compared with Carbide End Mills , PCD End Mills have the following obvious advantages:
â—Allow faster speed and feed;
â—High stability and it can improve workpiece quality with tight dimensional
â—Especially suitable for machining aluminum, copper and other metals with ultra-precision mirror grinding
â—Optimizes machine tool efficiency by increasing production capacity
PCD End Mill
PCD Ball Nose End Mill
PCD Thread Milling Cutter
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
+
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts, Carbide Drills , Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer , Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
PCD Ball Nose End Mills
Ball Nose End Mills,Ball End Milling Cutter,Bull Nose Cutter,PCD Ball Nose End Mills
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com