TIMKEN roll bearing repair process

Source: China Bearing Network Time: 2017-09-26

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. Take or accept the assembled TIMKEN bearing housing from the customer.
2. Use steam to sanitize the entire assembly and remove oil.
3. Thoroughly dismantle the TIMKEN bearing housing; view all parts; record all information,
4. Remove the bearing; record the serial number; load area; bearing rim order,
5. Sanitary bearings; view all parts; polish any slender scratches/damages and record information about the situation,
6. Set up TIMKEN bearings; measure and record the initial clearance of the bearing,
7. Look at all the threaded holes; organize all the smooth channels,
8. Provide a view of the presentation of all components; including conditional depictions and scales,
9. Sleek smooth bearings and smooth passages; if required; use customer-supplied smooth oil or TIMKEN-approved alternatives,
10. Rotating bearing load area; firstly, the opposite steel ring is placed in the TIMKEN bearing housing.
11. Record all information,
12. Assemble the TIMKEN bearing housing accessories from the beginning; package as required,
13. Send the thoroughly assembled TIMKEN bearing housing to the customer.

Recommend to friends comments close window

Bearing related knowledge

Disposal of scars in SKF bearing units
How to prepare the SKF bearing rolling mill bearing device for the protection of the bearing life and the protection and protection of the pump bearing
The cause of the abnormal phenomenon of NTN rolling bearing

This article links to http://
Please indicate the bearing network http://

Previous: NSK imported bearings due to the grinding force of the transformation layer: the seal FAG deep groove ball bearings _ suffix. 2Z, 2ZR, 2RSR analysis

Cutting is an essential basic tool in the processing of ceramic components. Laser cutting technology has been favored for its non-contact, flexible, high efficiency and easy to achieve digital control. It is hoped that this high-energy beam processing method can be treated like metal materials. Complete the non-destructive cutting of ceramics. With laser as processing energy, the development potential in hard and brittle ceramic processing has been seen. It can realize contactless processing and reduce the damage caused by contact stress to ceramics. Ceramics have higher absorption rate for laser, focusing The energy of the high-energy laser beam acting on the local area of the ceramic can exceed 108 J/cm2, and the material can be melted and evaporated in an instant to achieve high-efficiency processing.

Laser Cutting Ceramics

Laser Cutting Ceramics,Alumina Ceramic Substrate Sheet,Tobacco Laser Cutting Nozzle,Machinable Ceramic Filter

SHENZHEN HARD PRECISION CERAMIC CO.,LTD , https://www.hardcm.com