Electric sightseeing vehicles are clean, environmentally friendly and well-loved. It is also widely used in major scenic spots. Then, what are the common faults of the electric sightseeing car rear axle? How is it maintained? Xinyang Meizhi Xiaobian comes to you for your help.
1. Anomalous noise may be caused by misalignment between the active and driven bevel gears and the flank clearance, excessive gear wear, and excessive bearing wear.
2. Excessive bearing pre-tightening force, too small gear meshing backlash, inaccurate meshing marks, and lack of lubricating oil can all cause abnormal heating.
3. Always check the tightness of each joint. If loose, tighten it immediately to avoid accidents.
4. Regularly inspect each joint for lubricating oil leakage and remove it if found.
5. Always remove the mud from the vent plug to keep the vents open. Always check the amount of lubricant, not too much and not enough.
6. There are several reasons for abnormal noise on the rear axle during vehicle operation:
<1>Axial bearing damage, replace the bearing.
<2> The amount of gear oil is not enough, or the gear oil is used for a long time, the oil quality changes, add gear oil or put the original gear oil, and inject the new gear oil and oil amount specified in the specification.
<3> The rear shock absorber is damaged or leaks, and the shock absorber is replaced.
With these new skills, did you get it?
This article is organized and published by Hefei JBG Logistics Management Co., Ltd. We are specialized in floor scrubbers, driving scrubbers, hand-push scrubbers, fully automatic scrubbers, sweepers, driving sweepers, hand pushers Comprehensive service providers such as sweepers, high pressure cleaners, electric sightseeing vehicles, electric patrol cars and other cleaning equipment and cleaning tools are welcome to visit our company.
The glassfiber Reinforcement Net is produced by fiberglass fabric with special surface treatments. It is a kind of necessary structure material in the EIFS (exterior insulation and finish system).
Glassfiber reinforcement mesh has high strength, good cohesion characteristics and can combine with EPS board firmly. Moreover, it can resist corrosion from building material such as cement and other alkaline materials, also prevent wall`s cracking, improve wall`s stress and impact resistance. Therefore, it is an ideal reinforcement material.
Fiberglass Reinforcement Net
High Strength Fiberglass Reinforcement Net,Composite Fireproof Mesh,Fiberglass Netting,Fiberglass Compesite Net, Glassfiber reinforcement mesh
Hebei TongChan Imp.&Exp.Co., Ltd. , https://www.tongchanmesh.com
