Qiao Longde: The entire process of wall materials innovation and building energy conservation runs through innovation and is full of challenges. In the early stages of the implementation of system engineering, the production scale of its production companies and the application volume of construction companies are relatively small and small. If a company fails to reach its operating scale and loses money, it must stand still. In short, its beginning and promotion are full of challenges, so there is only one experience that comes down to it. Therefore, in the final analysis, it is a brand-new innovation project. It is a whole process of new and old concepts and new and old things that are replaced by new and old innovation processes. It is a full-scale challenge and a success. history record.
First of all, the innovation of wall materials and building energy conservation are themselves an innovative topic and the cause of reform. It starts from the need to improve the quality of people’s lives and safeguards the sustainable development of humankind. It prohibits the production of solid clay bricks that destroy land and resources are unreasonable and disharmonious with social development, and improves the performance and function of the building wall materials, thereby improving Building function. Although this measure cannot be described as unprecedented, it has only been gradually, experimentally, and small-scalely conducted in history. This time, it is necessary to carry out a revolution in wall materials throughout the country to change the original wall. The material is undoubtedly a reform. It is undoubtedly an innovation in people's thinking, ideas, and ideas. Because it is new and there is no mature practice, it is a theoretical to practical innovation from beginning to end.
Secondly, the systematic organization of system engineering and management institutions for wall material innovation is itself a kind of thinking innovation and institutional innovation. These two systems have broken the boundaries between departments and services from the business and the organization. They are not limited by the functional authority of the departments, and are not affected by the cross-cutting of vertical and horizontal businesses. They also determine the connotation and organization and management of system engineering according to the objective needs of things. s frame. Because it is free from any framed instructions and restrictions, it conceives the objective and actual needs of the system engineering connotation and the functions of the various organizations of the system, so it is a kind of thinking innovation and the liberation of ideas. It breaks the limitations of the administrative management system. The connection point between the business and the organization is based on the needs of system engineering and system engineering configuration. It is based on system engineering and can be said to be an innovative engineering setting. And organizational system. From the organizational level, this systematic organization has formed a systematic project around the central government level and local governments at all levels. It has unified the goals and progress of wall reform, and has formed its own organizational system according to the business division of labor. It turns out to be innovative. The organizational system and practice have proved that it is objective and effective.
Thirdly, from the perspective of a series of policies issued by the state, it fully embodies the innovation of policies and the innovation of mechanisms. According to the theory of market allocation of resources and the principle of market orientation, China’s wall reform policy is to use the market mechanism as early as possible, guide clear, and mechanism. Flexible, clear role model. From the very beginning, it broke the traditional formula of planned economy thinking. It used waste and profit to produce new wall materials, received less money, and received no money. It produced tax breaks, tax exemptions, and preferential taxes for new wall material companies. On the contrary, Units that produce solid clay bricks and use solid clay bricks have increased taxation and taxation, which has led to a clear policy orientation. Policy-oriented markets and market-leading mechanisms are very new. In addition to economic policies, in terms of energy, environmental protection, and land resources, various policies have stipulated policies for restricting the production of solid clay bricks and supporting the innovation of new wall materials to create clear, reward-and-punish policies. To this end, it can also be said that a successful reform of wall materials is backed by an innovative policy mechanism, which is also the main factor that contributes to its success. Also, the formulation and introduction of new standards will advance the standardization and reform of the construction and building materials industries. Whether it is the formulation of various types of new wall material standards or the design of construction standards and construction standards for wall materials and the formulation of a series of corresponding standards and specifications, it not only guarantees the production and promotion of new wall materials, but also The introduction of the new standard has in turn promoted the quality improvement and standardized production of wall materials, saved resources, reduced losses, improved the structure and function of buildings, improved the efficiency of use, and made the management of superstructure more adaptable to changes in the economic base. The need for development. In short, the entire wall material innovation and construction energy conservation implementation process are carried through reform and innovation. Since it is an innovation, it is certainly not easy sailing. Every step is faced with challenges, and even more cruel challenges are often faced. Because it is not only a new thing, but it is not a brand new thing. If it is a new thing, although it will be more difficult, the resistance will be relatively less. However, although the wall reform is new, it is in the original The innovations on the basis of wall materials must shake the foundation of solid clay bricks, change the production methods and product performance, and have a long way to go before the solid clay brick factories that are producing and entering normal production and production are restricted from production until production stops. The design of the building wall should be changed, the construction procedures for the familiar roads should be adjusted, the new materials with low efficiency should be promoted vigorously, the solid clay brick enterprises with relatively good benefits should be limited, the material supply channels already established must be changed, the shortage of talents, and the shortage of resources The township and township enterprises with weak technical foundations must also be reconfigured to become bases for the production of new types of wall materials, etc., all of which are changes that change the reality. Not only do we have to change our concepts, we must also change the mode of development, and we must adjust the interest relationship. Generally, we are full of challenges. Each step comes from the challenge. Each single breakthrough is a challenge, so it is full of the whole process. Challenging.
In short, the experience of reforming and building energy-saving for more than 20 years is a record of the era of reform and innovation. It is a history of new things, new concepts, challenges to traditional concepts, and the progress made by Qin Hanwa. Looking back on the past and looking forward to the future, as it is a product of innovation and the result of innovation, innovation and challenges go through the whole process. Therefore, in the future work, we should still adopt innovative trends, innovative thinking and innovative actions. Welcome the arrival of a new target for the development of the next new wall material.è’‰ Multifunctional composite insulation board technology and equipment Sinoma Jianke Building Materials Technology Research Institute and Harbin Institute of Technology jointly developed a multi-functional composite insulation board technology and equipment. The two sides of the heat insulation board are made of inorganic fireproof and heat insulation material, and EPS insulation board is used in the middle, and different specifications can be made according to the requirements of the customers. The products are prefabricated in the factory. When the sheet is poured and molded, it is compounded with the facing bricks. The construction and assembly work opens up a new way for the exterior insulation veneer brick facings, and has sufficient safety. Development and production of multifunctional composite insulation board production machinery and equipment, including various types of semi-automatic and fully automatic EPS plate machine, foaming machine, forming machine, plate cutting machine, AC spot welding machine and other equipment.
(Yang)
Durostone Sheet or Synthetic stone is a kind of green and environment-friendly stone, which is composed of more than 95% natural stone powder, with a small amount of polyester and adhesives, mixed in vacuum, pressurized, and formed by vibration
Definition:
Durostone Sheet comes from the "stone kingdom" Italy, the English "composite stone".
According to the raw material into synthetic marble, synthetic quartz two kinds.
With the advantages of natural stone, large areas are paved with achromatic, environmental protection, high strength and complete variety.
Widely used in hotels, shopping malls, office buildings, public places, family walls, floors, etc.
Production process:
1. Collect stone materials from the quarry
2. Mix resin and stone powder and other materials in vacuum
3. Vacuum extruding ingredients
4. Leave about 10 days in the factory
Cut into large plates according to requirements
6. Measurement and polishing
7. Cut from the big board to the required panel
8. Waxing and corner handling and packaging
9, storage,
USES:
Main use in the wall of building adornment, ground, mesa, stair step.
The synthetic stone is used in the following areas:
1. The airport, the ground of the airport, part of the wall, the hallway, the bathroom table and the wall.
2. The public parts of the building and office buildings, such as the floor of the hall, the wall of the wall, the wall of the floor of each floor, the wall of the toilet, floor, mesa and elevator well.
3. Square, mall, these places can be used in large areas such as walls, floors, toilets, elevators and so on.
4, villa, with mesa main, in toilet also can often arrive, still have stair step.
5. Other places, such as public buildings, museums, exhibition centers, hospitals, schools, etc.
Advantages:
1, colorless difference, meet the market's natural marble directly from the mine mining, the slightly and the formation of mine decided the composition of natural stone and marble texture, so led to a number of natural stone texture of inconsistencies, and synthetic stone is to smash of natural marble, and processing and forming, so can very good control of color difference, this synthetic stone within a certain range can look without clear off color, this has the advantage of convenient and the laying of large area, as a whole to maintain consistent style.
2, environmental protection, natural marble is different according to the composition and properties, some deep color radioactive substances, and synthetic stone in choosing a natural stone powder can avoid these substances, so as to achieve no radiation environmental standards.
3, close to the natural stone texture, synthetic stone can be very close to the natural texture, color and so on some colors, the effect of synthetic stone laying large area can completely and natural stone.
4. Excellent performance, good absorption rate, and structure more closely than natural stone.
5. No crack, anti-fouling, easy to clean.
Specification: The thickness of sheet material can be produced from 3mm to 50mm,the usual specification of 3-50mm is 1150mm* 1250mm, It can also be customized according to requirements, and the width cannot exceed 1220mm, and the length is not limited
Color: Green ,can also be made another color, and the color order is 500KG.
Modified varieties: can be added to the fiberglass, copper powder and molybdenum disulphide to enhance the bar.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.
Add flame retardant to flame retardant rod from UL 94V-0 to HB flame retardant grade. Other modification requirements are customized according to customer's actual use.
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Durostone Sheet
Durostone Sheet,Durostone Sheet Price,Cheap Durostone Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com