Model NO.: Aluminum Sheet
Alloy: Alloy
Thickness: 0.21-1.5mm
Width: 600-1520mm
Pattern: Custom
Product Material: Aluminum
Product: Color Coated Aluminum Coil
Trademark: EUALU
Transport Package: Wooden Cases
Specification: GB/T3880 ASTM
Origin: China
HS Code: 7606
Color Coated Aluminum SheetWe are the leading aluminum supplier in China, our main proudcts areprepainted aluminum sheet, color coated aluminum coil, aluminum circle sheet, aluminum chequered palste, aluminum tread plate, aluminum stucco sheet, aluminum foil, aluminum foil roll. Below is the specification of our color coated aluminum.
Specification
| Paint type | PVDFÂ Â Â POLYESTERÂ Â Â Â Â ACRYLIC |
| Thickness | 0.024mm-1.20mm |
| Width | 50mm-1700mm (Standard width:914mm, 1000mm, 1219mm) |
| Coils core diameter | 150mm, 405mm, 505mm, 508mm, 510mm  POLYESTER>=17micron |
| Coating thickness | PVDF >=25micron |
| Gloss | 10-90% |
| Coating hardness(pencil hardness) | More than 2H |
| Coating adhesion | No lower than first grade |
| Impact resistance | No cracking and peeling(50kg/cm, ASTMD-2794:1993) |
| SheetMEK resistance: | More than 100 times |
| Advantage | Flexibility |
| Usage | Aluminum composite panel, ceiling, door and windows, electric appliance,etc. |
| Temper | O,H12,H14,H16H18,H19,H22,H24,H26, H28,H32,H34H36,H38, H42 H44 |
| Alloys number | 1100, 1050, 1060, 3003, 3004,3005,3104, 3105, 5005, 5052, 8011 |
| Application | ACP, aluminum, ceilings, aluminum sheets, honeycomb panels and aluminum roofing, lighting decoration, Household electrical appliances, food package (such as pop can cover &Â ring-pull), furniture ect. |
Chemical Composition %
| Alloy No. | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | V | Ti | Zr | Al |
| Â | ||||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.05 | 0.03 | - | Remainder |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.05 | 0.03 | - | Remainder |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | 0.05 | 0.03 | - | Remainder |
| 1100 | Si+Fe:0.95 | 0.05-0.20 | 0.05 | - | - | - | 0.01 | 0.05 | - | - | Remainder | |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | 0.1 | - | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | Remainder |
| 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | Remainder |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | 0.1 | - | Remainder |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | 0.15 | - | Remainder |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.90 | 0.1 | - | 0.1 | - | 0.1 | - | Remainder |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | 0.1 | - | Remainder |
| 7005 | 0.35 | 0.4 | 0.1 | 0.2-0.7 | 1.0-1.8 | 0.06-0.20 | - | 4.0-5.0 | - | 0.01-0.06 | 0.08-0.20 | Remainder |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | 0.2 | - | Remainder |
| 8011 | 0.50-0.90 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.05 | - | 0.1 | - | 0.08 | - | Remainder |
Product Show
We can coat the prepainted aluminum sheet according to RAL color and Pantone color as well as Other color samples
Our Office
The performance of PE color coated coil
1) Thickness≤0.5mm
| Item | Test Item | Standard | National standard | Test Result |
| 1 | Color Difference | ECCA T3 | ΔE≤2.0 | ΔE≤1.5 |
| 2 | Gloss Difference | ECCA T2 | ≤10 | ≤5 |
| 3 | Coating Thickness | ECCA T1 | Min 14µm | ≥16µm |
| 4 | Pencil Hardness | ASTM D3363 | ≥HB | HB |
| 5 | T-bend | ASTM D4145 | ≤3T | ≤2T |
| 6 | Adhesion | ASTM D3359 | Grade 0 | Grade 0 |
| 7 | Impact | ASTM D2794 | ≥20kg.Cm | ≥20kg.Cm |
| 8 | Boiling water Resistance | GB/T17748 | 2h no change | 2h no change |
| 9 | Solvent Resistance | ASTM D2248 | 200 times paint remaining | 200 times paint remaining |
| 10 | Salt Resistance | ASTM B117 | 720 hrs≤grade 1 | 720hrs≤grade 1 |
| 11 | Dirt Resistance | GB/T9780 | ≤5% | <5% |
| 12 | Color retaining | GB/T16259 | 600hrs △E≤2.0 | △E≤2.0 |
| 13 | Gloss weaken Level | 600hrs ≤ grade 2 | 600hrs ≤ grade 2 | |
| 14 | Chalking | 600hrs No Change | No Change |
2) The performance of PVDF color coated coilÂ
| Item | Test Item | Standard | National standard | Test Result |
| 1 | Color Difference | ECCA T3 | ΔE≤2.0 | ΔE≤1.5 |
| 2 | Gloss Difference | ECCA T2 | ≤10 | ≤5 |
| 3 | Coating Thickness | ECCA T1 | Two layers Min 23μm | ≥25μm |
| Three layers Min 30μm | ≥34μm | |||
| 4 | Pencil Hardness | ASTM D3363 | ≥HB | HB |
| 5 | T-bend | ASTM D4145 | ≤2T | ≤2T |
| 6 | Adhesion | ASTM D3359 | Grade 0 | Grade 0 |
| 7 | Impact | ASTM D2794 | ≥50kg.Cm | ≥50kg.Cm |
| 8 | Boiling water Resistance | GB/T17748 | 2h No change | 4h No change |
| 9 | Solvent Resistance | ASTM D2248 | 200 times paints remaining | 500 times no break |
| 10 | Acidity Resistance | ASTM D1308 | 5%HCL 24hrs No change | No change |
| 11 | Alkali Resistance | ASTM D1308 | 5%NaOH 24hrs No change color △E≤2.0 | No change |
| 12 | Nitric acid Resistance | AAMA620 | △E≤5.0 | △E≤5.0 |
| 13 | Oil Resistance | ASTM D1308 | 20#oil 24hrs No change | No change |
| 14 | Salt Spray Resistance | ASTM B117 | 4000hrs ≤Grade 1 | No change |
| 15 | Abrasion resistance | ASTM D968 | ≥5L/μm | ≥5L/μm |
| 16 | Dirt Resistance | GB/T9780 | ≤5% | <5% |
| 17 | Color retaining | GB/T16259 | 4000 hrs△E≤4.0 | 4000 hrs △E≤3.0 |
| 18 | Gloss weaken Level | 4000 hrs ≤ Grade 2 | 4000 hrs ≤ Grade 2 | |
| 19 | Chalking | 4000 hrs No change | 4000 hrs  No change |
Our Factory
Packaging
Advantages
1. Resonable production arrangement to make delivery very fast;
2.we are able to provide leading tolerances,metallurgical assistance,quick and reliable delivery,samples for new products,etc.
3.We have the strong capability to meet your particular requirement for the products.
4.To guarantee the quality of the products we can meet most of the standards all over the world such as ASTM standard.
FAQ
Q: What is the minimum order quantity?
A: 5 tons.
Q: What is delivery time?
A: 20~30 days after deposit. Except for public holidays.
Q: How can you guarantee the quality?
A: We have rigorous quality test system, from raw materials to finished products, the materials
must be checked and signed  by QC people.
Q: How long can I get a quote?
A: The quotation can be provided not longer than 24 hours on condition that we know all detailed
requirements.
Q: Â What information should I let you know if I want to get a quotation?
 A: 1) The size of products (Alloy ,width ,thickness, application);
     2) The specification of the products you want.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample
is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! we are a manufacture. We have our own factory in Anhui province China. We can book the hotel for you before you come to China .                        Â
Neway Rubber Products Co., Ltd. , http://www.lxrubbers.com