When housing renovation, the industry is mainly aware of the precautions for water and electricity renovation , such a water and electricity line can be a reasonable layout. At the same time, it is necessary to understand the price of water and electricity decoration, so that it will not be overcharged by the staff of the renovated hydropower. The following Xiao Bian gave everyone a detailed introduction about the relevant content.

Water and electricity decoration considerations

1. What should pay attention to water and electricity decoration? When designing a waterway in a bathroom, it is necessary to first think about the related equipment. Such as: water heaters, water purifiers, kitchen treasures, wash basins and toilets, etc., their installation methods, installation location and whether the need for hot water. Before installation, it is necessary to use electric water heaters or gas. This is to avoid the temporary replacement of water heaters, which leads to repeated alteration of the waterway. The toilet treatment should be followed by a toilet, wash basin, washing machine and other water outlets, but also to take an outlet, so that after the convenience of picking up water.

2. When installing the wires in the living room, be aware of what the wires are all about. Such as: lighting lines, power lines, television lines, air conditioning lines, telephone lines, doorbell lines, computer lines and so on. The location of these wires should be reserved. The general situation is to reserve telephone lines at the edge of the sofa, reserve power outlets for drinking fountains, humidifiers, etc., and reserve doorbell lines on the inside of the door. The living room should reserve almost 5 power outlets. There are some electrical appliances that plug out as much as possible with a socket panel with a switch that can be switched off when not in use so that no electricity is wasted.

3. For the waterway reconstruction of the kitchen, be aware of the location of the water heater and faucet. The water heater in the kitchen is generally shared with the bathroom. Therefore, when remodeling the waterway, it is necessary to think about where the water heater should be installed. In this way, the installation position of the hot and cold water pipes can be confirmed and the waterway can be modified.

Hydropower renovation offer

1. If the concealed pipe is made of 20PP-R material, its approximate price is 60 yuan/m. If the material of the downpipe is 50 PVC, the installation price is about 60 yuan/meter. If the material of the plumbing mounted is 20PP-R, the approximate price is 45 yuan/m. If the size of the tap is 15 or 20, the price of the tap is 8 yuan/piece.

2. If the water meter specification is 15 or 20, the price is about 25 yuan/piece. If the total valve size is 25, the total valve price is 30 yuan/piece.

3. If the flush valve specification is 15 or 20, the flush valve price is about 20 yuan/set. If the valve specifications are 20 or 25, the valve replacement price is 25 yuan/piece.

4. The material of the tube and the weak wire of the dark pipe is made of PVC. The price of the switch socket box type 86 is about 10 yuan/set, the type 118 is 15 yuan/set, and the 16-channel information integrated box is added. Yuan / set.

The article concludes: In order to protect the safety of the family's electricity and the convenience of water use, it is necessary to understand the relevant contents of the hydropower renovation before the water and electricity renovation. It is hoped that the above-mentioned notices on hydropower renovation and the quotation of hydropower renovation can help everyone. The above quotation for hydropower renovation is for reference only, because the prices in different regions are different.

Sch****** Moving Walk Spare Parts

Sch****** 9500-35 - optimal price/performance

Versatility on demand
Sch****** 9500 moving walks share the design versatility of Sch****** escalators. There is a wide choice of materials, finishes, colors, sizes, lighting and other options that can be combined to produce customized solutions. It can accommodate transportation lengths up to 100 meters.

• Inclination from 0° to 3°
• Pallet widths of 800 mm and 1000 mm
• Balustrade heights of 900 mm and 1000 mm
• Balustrade panels available in multiple color options, brushed stainless sandwich panels, or powder coated sheet steel
• Two balustrade design variants
• Balustrade profiles and deckings in stainless steel or powder-coated aluminum
• Cladding available in stainless steel or painted sheet steel
• A choice of stainless steel or ribbed aluminum floor covers
• Various lighting options, including balustrade and skirt lighting
• Can be installed indoors and outdoors, covered.
  

Sch****** 9500-45 - plenty of space to maneuver

The high-performance moving walk for long distances
With the maximum pallet width of 1400 mm it is possible to accommodate as many as 16,000 passengers per hour. Sch****** 9500-45 is able to cover high transport volumes and transportation lengths of up to 150 meters.

Flat construction
The flat construction of Sch****** 9500-45, which has no truss and is only 400 mm high in its central part, is a great advantage when space is at a premium.

Long service life
The extremely stable pallets, with a depth of 400 mm, and the durable connection elements are built to withstand even the most punishing use. The robust stainless steel balustrade and the solid, steel-reinforced newel end are virtually resistant to damage caused by carelessness or vandalism.

Sch****** 9500 10/15 - inclined moving walk

Especially developed for shopping malls, Sch****** 9500 10-15 inclined moving walks provide quiet, comfortable transportation from floor to floor, even with a fully loaded shopping cart. Sch****** products never compromise quality, assuring dependable performance and passenger safety. Streamlined and flexible in design, these units leave plenty of room for architectural expression, indoors or out.

Streamlined construction
No moving walk on the market is more compact than the Sch****** 9500/10-15.

• Incline ranging from 10° to 12°
• Short installed lengths
• Ideal for covering short distances
  
• 10° flat combs at both ends allow shopping carts to roll on and off easily
• Ideal for outside use
  
• Pallets are guided beneath the skirt for maximum user safety
• Cambered pallet surface delivers excellent grip when damp or wet.
  

Small installation dimensions
Patented short pallets with a depth of only 133 mm greatly reduce the transition curves. As a result, these moving walks require minimum installation space.

Sch****** Moving Walk Spare Parts,Sch****** Travelator Spare Parts ,Sch****** Moving Sidewalk Spare Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com