Indoor suite door is one of the most common categories in modern room decoration. Because of the attributes of its suits, it has a very good visual effect and has become the mainstream of the current door installation. So, how to install the indoor suite door ? Below, I have prepared a detailed installation process of the indoor suite door . Let's take a look!
1. Installation process of indoor door set
1. Clean up the site
Before the formal installation, we must first clean the door opening and the construction site. It is necessary to measure the size of the door opening in advance, so as to avoid damage and dirt on other walls during the construction process.
2. Combined door frame
When the door frame is purchased, it is all loose parts, which need us to assemble. The door top plate is generally 20-50mm longer than the door opening, and the door gap is 6-8mm. Fix the door frame, and then pull tabs on the left and right of the door frame to align the door frame with the door hole, and then nail two pull tabs in the middle of the top plate.
3. Install the door frame
Put the two sides of the door frame equally into the center of the door hole, and fill the gap between the door frame and the door hole with wood chips. Then choose 4 fixing points, with the floor to door height 10MM as the standard, and then install the hinged side panel with a pendant to align the vertical position to fix the door frame.
4. Install door leaf
When installing the hinge on the door leaf, pay attention to the flatness of the door leaf and the door frame (reserving a place before this construction), and install the door frame on the door frame. Then it is necessary to start testing the use, whether it can be opened and closed freely, whether the distance between the door top plate and the line is proper. Several door panels must be carefully inspected.
5. Installation lines
When installing the line, we cut the line into 45 ° according to the size of the door frame. The horizontal and vertical lines were fixed with 502 glue and glued to 90 °. Finally, the line was nailed to the door frame and the nail bar was covered.
6. Install the lock
First, draw holes and holes on the door and frame with a pencil. The drilling depth depends on the length of the screws you fix. After the aperture base is finished, the door handle can be fixed at the measured height of the door panel; after the door handle is fixed, the lock hole must be punched in the door frame, the depth depends on the lock core; the two must be kept at the same level, This way the door can be unlocked smoothly.
7. Install door suction
The height of the door suction is generally ten centimeters above the ground, and this position is well determined. The point to pay attention to is the firmness of the door stopper. The long-term opening and closing of the door is particular about the firmness of the door stopper.
8. Check
After the overall installation is completed, it is necessary to start the final inspection. Especially the flatness of the door frame, whether it will be raised, whether there are irregularities and so on.
Summary of the article: The above is the full content of how to install the indoor suite door and the installation process of the suite door. I hope that some of the construction details described in the article will be kept in mind, so that when you start your own construction in the future, you will not be in a hurry!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
bathroom showers,bathroom shower sets,bathroom shower odm,bathroom shower oem
Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.com