What is the bathroom when you take a shower at home? Is the bathing device in your house a shower or a bathtub? The appearance of the water heater provides convenience for people to bathe. When the bath is filled, water will flow from the sewer. However, sometimes When the sewer is blocked, there will be a situation where the accumulated water accumulates. Next, Xiaobian will take everyone to see the relevant content of the launcher .
First, interpretation
The water separator refers to a drainage device placed in a bathtub, a basin sewer, and the like.
Second, the basic information
According to the type, it can be divided into bouncing water, flipping water and lifting water. According to the material, it can be divided into all-copper water, stainless steel water, plastic water and so on. According to the use, it can be divided into bathtub water, basin water and so on.
The choice of the water purifier: This depends on whether there is an overflow in the basin, and if there is a water purifier with an opening. If there is no choice, the drainer should be selected without an opening.
Third, what is the installation method of the water separator?
1. Turn the installation position of the water tank over and place it, hold down the water tank, and trace the outline along the edge. After removing it, draw a cutting line at the inner side of the contour line to cut it;
2. Insert the head of the soap dispenser into the round hole of the sink, tighten it with a nut, and screw the bottle;
3. Insert the faucet into the round hole and fix the faucet with a simple setter;
4. After fixing the faucet, place the two faucet inlet pipes on the faucet, pay attention to the placement position of the hot and cold water pipes;
5. Put the water purifier into the water hole of the sink and screw the water umbrella;
6. Apply the sealant to the edge of the overflow and glue the silicone seal to the edge of the overflow.
7. After the sealing ring is firmly fixed on the overflow device, apply a layer of sealant on the edge of the overflow device;
8. Align the overflow device with the overflow hole of the sink, and pay attention to the screw hole position of the overflow device;
9. Use a Phillips screwdriver to tighten the screw to the overflow overflow at the overflow hole;
10. Apply sealant around the sink cut, place the front edge of the installed sink close to the front edge of the cut and cover the glue, then slowly level the sink;
11. Put the silicone sealing ring into the small water pipe connection;
12. Tighten the down pipe and link it to the drainer;
13. Put the silicone sealing ring into the joint between the lower water pipe and the lower water pipe to tighten the hose;
14. Put the overflow pipe into the down pipe and tighten it.
15. Connect the hose hose to the drain.
The above content is the introduction of the relevant content of the launcher. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Well, today's introduction to the launcher is here. Thanks to the readers for reading this article and for the support and love of Xiaobian. If you want to get more home improvement information, please continue to pay attention to the decoration home network. .
More related wonderful reading:
What are the classifications of bathtub drainers? Bathtub drainer installation method
Which basin is better? How to install correctly?
Which is better for the basin drainer? Basin water purifier installation precautions
Pvc Translucent Roof Sheet,Plastic Pvc Translucent Roof Sheet,Pvc Material Pvc Roof Sheet,Pvc Transparent Roof Sheet
ZHENHAO BUILDING MATERIALS CO.,LTD , https://www.nbpvcroof.com