The water tank and the toilet of the split toilet are separated, and it is necessary to bolt the toilet to the tank when installing; then, what about the split toilet ? Two-piece toilet how to install and how two-piece toilet price? Let's take a look with Xiaobian.
How to split the toilet
The split toilet has a high water level, ample momentum and style, and the price is most popular. The split body is generally washed down and the flushing noise is relatively large. Because the tank and the main body are fired separately, the yield is high. Splitting selectivity is limited by the pit distance. If it is less than the pit distance, it is generally considered to build a wall behind the toilet seat to solve it. The water level of the split body is high, the flushing power is strong, and of course the noise is also loud. Split styles are not as good as conjoined ones.
Split toilet installation
1, the main installation
The split type toilet is more troublesome to install, and the main body and the water tank are divided into two components. The main body needs to be installed first. The main body is more elaborate and requires a special leather ring for the toilet seat. It is placed on the water outlet of the toilet bowl, and the toilet bowl body is then pressed up, but it must be pressed, otherwise it will leak.
2, water tank installation
The water tank for the split type toilet is mounted on the toilet bowl and the positive flush port and the connecting screw hole are found. The gap between the tank and the wall should be uniform and not more than 20mm. The rubber gasket between the water tank and the toilet shall be leveled. After the flushing column is tightened, the leakage between the water test tank and the toilet shall be checked. If leakage is found, apply the putty to wipe the magnetic surface of the rubber test piece after drying. Fasten. After the flushing plug is fastened, the two connecting bolts on both sides of the flushing port can be put on.
3, water supply pipe installation
The water supply pipe has the left side and the right side, which is also determined by the toilet. The position is not as strict as the sewage pipe. The water supply pipe and the water tank are mostly connected by the soft officer.
4ã€Drainage pipe installation
In general, the split type toilet uses a drainage method. There are two types of toilet bowl, 300mm and 400mm, and 350mm. Generally speaking, the specific data can be obtained by measuring the horizontal direction of the toilet from the side of the toilet to the center of the sewage pipe. In the connection between the sewage outlet and the outlet of the toilet, the “S†toilet is a dark interface on the ground, and the reserved drainage outlet on the ground. The ground-reserved drain outlet should be 10mm above the ground (allowable deviation of 5mm).
Split toilet prices
About two-piece toilet over how to price and other content as well as two-piece toilet brief introduction here, I hope for your help. For more information, please visit this website. Stay tuned.
Toilet
Fire Hydrant,Epdm Fire Hydrant,Bronze Angle Globe Fire Hydrant,Ductile Iron Fire Hydrant
Jiangsu Hida Marine Valve Co., Ltd , https://www.haidavalve.com