The following is a summary of users' opinions during the installation of Pilsa water pipes. You may wish to refer to it!
Click on the number of tubes first and finally calculate it.
The installers took 17 tubes of 4 meters in length and 4 meters in length of 1 meter. And 2 bags of spare parts and many tools. Personally think that if it is an elevator house, this worker should have no problem moving the items upstairs. But if it is a multi-storey house, it will be very difficult.
The installation procedure is very simple. Workers will first work with plumbers and/or designers, and then use a special scissors to cut the material according to the actual situation.
The material to be joined was placed on both ends of a heat welder and rotated about one minute to dissolve the material.
Connection completed
Dissolve the two ends into each other and wait approximately 1 and a half minutes to allow the dissolved material to cool and bond.
The impact drill drills holes to install wooden pillows and fix the tubes.
General bathroom plumbing installations.
Install screw heads.
Stress test
Pump the pressure gauge to 1MPA, which is said to be 10KG.
After 45 minutes, the pressure remained at 1 MPa.
The top pipe is tied with wires.
Ten kilograms of half an hour pressure can not afford to complete the installation.
>>> Related Links: How to identify true and false Pilsa water pipes
Click to enter>>> Pilsa water pipe (small live home shop)Hydroelectric reform toilet design
1. Low gravity caster wheel Nylon
2. Sapphire blue antirust coating support
3. Single wheel Nylon material with large load capacity
4. Double ball bearing caster wheel
Nylon castor, Low Gravity Caster,Low Profile Casters
Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com