1. Process point cloud data:
CopyCAD has a friendly input and output interface that supports point cloud data reading in multiple formats. In addition to the standard formats such as ASCII, IGES and NC, special data formats are available for different scanning devices.
For input point cloud data, CopyCAD provides a variety of point cloud editing optimization methods for different measuring devices and measurement methods, which can reorder point cloud data and move, rotate, zoom, mirror and other editing operations, according to different requirements. The point cloud model is clipped in a variety of ways, including planes, polygons, or contour curves. The function of the offset point cloud model is used to correct the deviation caused by the probe, and the point cloud model is filtered by using functions such as weighted average smoothing, burr smoothing and tolerance, sparseness, filtering, etc., smoothing, and removing dead pixels. Improve the quality of the point cloud to ensure the quality of the triangle patch and improve the processing speed.
For complex point cloud models that require several measurements, CopyCAD also provides manual alignment, reference point (ball) alignment, and optimal fit and alignment for alignment and output alignment accuracy data for reference.
2. Process the triangular model:
Since the triangular model is the basis for generating surfaces, the quality of the triangular model plays a key role in reverse success.
For the creation of a triangular model, CopyCAD provides both automatic and manual generation of triangular models.
Due to the model's own defects or incorrect measurement methods, or the existence of measurement data, there are often many defects and holes in the triangle model generation. There are several ways to edit and optimize this CopyCAD: you can manually add or remove partial triangle patch data. CopyCAD provides Trifix function for automatic and manual stitching of holes in the triangle model; it can automatically detect and repair the existing triangular models with small, narrow, overlapping and intersecting problems, and smooth the triangular patch solid model. Operation: CopyCAD's interactive editing function can not only smooth the triangle model, but also eliminate the problems in the triangle model generation process due to data problems or measurement methods, as well as stacking and engraving functions, which can smooth and repair defects on the parts, avoiding the resulting Measuring model problems, especially for repairing damaged parts, improving the surface quality of the STL model.
Previous page next page
Mass Flow Meter Batch Controller
Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter Batch Controller, Batch Controller, Controller, Register & Counter.
A Main functions and features
1. Electronic control and showing filling amount & total automatically; 2. Mass and volume modes are available;
3. Amount/ Total preset function (if with control valve);
4. Data can be saved & re-displayed after power failure;
5. The last 2000 transactions can be saved;
6. Shift total and Inventory total can be calculated;
7. Error code will be shown when fault happens;
8. Over-low protect function;
9. Temperature compensation function;
10. Reasonable structure, easy for maintenance;
11. IC card system & GPRS communication (Optional).
B Main technical data
8-8-6 digit display: 8-digit for amount, 8 for total and 6 for price Environmental temperature: -35oC ~ +55oC
Working voltage: 24VDC ± 1V or 220VAV ± 10% Power: 20W
Relative humidity: 30%~90%
Atmospheric pressure: 86kPa~106kPa
Ex-mark: Ex d e ib IIB T4 Gb
Certificate No.: CCRI 19.1012
Mass Flow Meter Batch Controller, Batch Controller, Controller, Register, Counter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com