4343 & 3003 & 4343 Aluminum Both Sides Cladding Coil

Model NO.: AACC1007
Alloy Number for Core Layer: AA3003
Alloy Number for Cladding Layers: AA4343
Cladding Ratio for Each Layer: 4% to 15%
Width: 12 to 1300 mm
Thickness: 0.1 to 1 mm
Surface Finish: Original or Custom
Max Weight Per Packing: 1.5 Ton
Temper: O-H112
Place of Origin: Jiangsu,China
Applicaiton: Heat Exchanger and Industrial Fields
Transport Package: to Be Packed in Wooden Crate
Origin: Jiangsu, China
HS Code: 7606920000
Model NO.: AACC1007
Alloy Number for Core Layer: AA3003
Alloy Number for Cladding Layers: AA4343
Cladding Ratio for Each Layer: 4% to 15%
Width: 12 to 1300 mm
Thickness: 0.1 to 1 mm
Surface Finish: Original or Custom
Max Weight Per Packing: 1.5 Ton
Temper: O-H112
Place of Origin: Jiangsu,China
Applicaiton: Heat Exchanger and Industrial Fields
Transport Package: to Be Packed in Wooden Crate
Origin: Jiangsu, China
HS Code: 7606920000
1. Aluminum alloy number 
No. Classificaiton Layer Alloy Number Cladding ratio Ratio tolerance
1.1 Single side cladding Layer 1 4343 4%-30% ±2%
Core AA3003 NA NA
1.2 Both sides cladding Layer 1 4343 4%-15% ±2%
Layer 2 4343 4%-15% ±2%
Core AA3003 NA NA
2. Product size and tolerance 
No. Item Size Tolerance
2.1 Width (mm) 12-1300 ±1
2.2 Thickness (mm) 0.1-1 min ±0.005,max ±0.08
3. Chemical composition for some typical alloys 
No. Internal
Alloy Number		 AA number Chemical Composition (%)
Si Fe Cu Mn Mg Zn Ti Zr Bi Others Al
Each Total
3.1 3003 3003 0.6 0.7 0.05-0.2 1-1.5 0.05 0.1       0.05 0.15 RE
3.2 4004 4004 9.0-10.5 0.8 0.25 0.1 1.0-2.0 0.2       0.05 0.15 RE
3.3 4045 4045 9.0-11.0 0.8 0.3 0.05 0.05 0.1       0.05 0.15 RE
3.4 4104 4104 9.0-10.5 0.8 0.25 0.1 1.0-2.0 0.2     0.05-0.2 0.05 0.15 RE
3.5 4343 4343 6.8-8.2 0.8 0.25 0.1 0.05 0.2       0.05 0.15 RE
3.6 4343A 4343A 6.8-8.2 0.6 0.1 0.1 0.02 0.1       0.05 0.15 RE
3.7 7072 7072 0.7 0.1 0.1 0.1 0.1 0.8-1.3       0.05 0.15 RE
3.8 4343+1%Zn 4343+1%Zn 9.0-11.0 0.8 0.25 0.1 0.05 0.7-1.3       0.05 0.15 RE
3.9 4045+1%Zn 4045+1%Zn 9.0-11.0 0.8 0.3 0.05 0.05 1.7-1.3       0.05 0.15 RE
4. Mechanical properties for some typical alloys 
No. Alloy number Thick.
(mm)		 Temper Yield Strength
Rp0.2(Mpa).
Min		 Tensile Strength
Rm (Mpa)		 Elongation
(%)
A50,Min		 Typical usage
4.1 3003 0.08-0.15 O 35 95-135 8 Fins
4.2 3003 0.16-0.35 O 35 95-135 10 Fins
4.3 3003 0.15-0.3 H12 90 120-175 0.5 Fins
4.4 3003 0.06-0.08 H14 125 145-185 0.5 Fins
4.5 3003 0.081-0.3 H14 125 145-200 0.5 Fins
4.6 3003 0.06-0.16 H16 160 165-205 0.5 Fins
4.7 3003 0.2-0.3 H24 125 145-205 6 Fins
4.8 3003-1 0.35-3.0 O 35 95-135 20 Plate
4.9 3003-1 0.40-3.0 H14 125 145-185 3 Plate
4.10 3003-1 1.0-3.0 H24 125 145-185 10 Plate
4.11 4343 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.12 4343 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.13 4045 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.14 4045 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.15 4104 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.16 4104 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.17 3003 0.25-0.35 H24 130 155-205 6 Fins for air cooler
4.18 3003 0.1-0.2 H14 125 145-185 1 Fins
4.19 3003 0.1-0.3 O 35 95-135 10 Fins
4.20 3003 0.3-0.8 H14 125 145-185 2 Plate
4.21 3003 0.8-2.5 H14 125 145-185 4 Plate
4.22 3003 0.5-1.6 O 35 145-185 20 Plate
4.23 3003-1 0.3-1.8 O 35 95-135 20 Band
4.24 3003-1 0.5-4.0 O 35 95-135 25 Plate
5. Surface finish and other properties 
No. Item Description
5.1 Surface finish a. The material shall be free from pinholes and tearing; b.The material shall be free waves and buckles; c. The slit edges must be free from burrs and shall be straight and parallel.
5.2 Depth of Curvature In any length or width of 1 meter of the material,the depth of arc shall not exceed 2 mm.
6. Packing,Shipping and others 
No. Item Description
6.1 Packing To be packed in wooden boxes with card board and cutting with paper core in-between the coil max package weight 1500 kgs
6.2 Inner and outer diameter Inner diameter 100/150/200/250/300/400/500mm can be optional based on product spec. and quantity,max outer diameter shall not exceed 1700mm
6.3 Rolled core material Paper,aluminum,iron or none can be optional based on product specification or  requirements
6.4 Coil orientation Coil orientation in clockwise direction and eye to sky,anticloclwise can be optional
6.5 Packing way Horizontal or vertical packing can be optional based on product specification and transfer safety
6.6 Marking Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight
6.7 Shipping tools Ship goods by van to departune port then by sea to desitination port
6.8 Quantity variation ±10% variation with order quantity shall be acceptable

7. Brief of metal cladding material

        Metal clad material is a kind of material which combines different metals together with metallurgical bonding at the interface.Clad material greatly improves thermal expansion,strength,fracture toughness,impact toughness,abrasion resistance,electrical properties,magnetic properties and many other performances of single metal material. As a result, this material is widely used in petroleum,chemical,shipbuilding,metallurgy,mining,machinery manufacturing,electricity,water conservancy,trqansportation,environmental protection,pressure vessel manufacturing,food,brewing,pharmaceutical and other industry fields. Aluminum based multi-metal clad material is a clad material which clad aluminum,aluminum alloys with other metals. In theory,aluminum and aluminum alloy can be cladded with most metals.
        Typical applications for aluminum based multi-metal clad material
        Aluminum clad steell material
        The cladding of special steel and aluminum alloy combines the strength of steel and the excellent heat transfer performance of aluminum alloy, and makes brazing between steel and aluminum fins possible, which brings great changes to the design of the large cooling system. So this material is largely used in single-row type air-cooling condensers (ACC) for power station which is highly recommended by our government every year. The ACC system could save billions of tons of water for the whole country.
        Bushing Materials
        Babbitt (high tin alloy)-Steel clad material is excellent self-lubricated material, and is the important component of sliding bearing, which is necessary in the power system of cars,ships and machines.
        Aluminum clad stainless steel material
        The combination of stainless steel and aluminum alloy offers stainless steel better heat transfer performance and greatly reduces the material weight,at the same time,the corrosion resistance and strength is still good.This kind of material is a good material form manufacturing energy-saving cookers,and can dramatically reduce the weight of the vehicles when used for auto parts.
        Aluminum Clad copper material
        Copper is the best heat transfer and electric conductive material, and aluminum is second only to it. So the combination of the two can maintain good electrical conductivity and thermal conductivity meanwhile reducing weight and cost significantly.
1. Aluminum alloy number 
No. Classificaiton Layer Alloy Number Cladding ratio Ratio tolerance
1.1 Single side cladding Layer 1 4343 4%-30% ±2%
Core AA3003 NA NA
1.2 Both sides cladding Layer 1 4343 4%-15% ±2%
Layer 2 4343 4%-15% ±2%
Core AA3003 NA NA
2. Product size and tolerance 
No. Item Size Tolerance
2.1 Width (mm) 12-1300 ±1
2.2 Thickness (mm) 0.1-1 min ±0.005,max ±0.08
3. Chemical composition for some typical alloys 
No. Internal
Alloy Number		 AA number Chemical Composition (%)
Si Fe Cu Mn Mg Zn Ti Zr Bi Others Al
Each Total
3.1 3003 3003 0.6 0.7 0.05-0.2 1-1.5 0.05 0.1       0.05 0.15 RE
3.2 4004 4004 9.0-10.5 0.8 0.25 0.1 1.0-2.0 0.2       0.05 0.15 RE
3.3 4045 4045 9.0-11.0 0.8 0.3 0.05 0.05 0.1       0.05 0.15 RE
3.4 4104 4104 9.0-10.5 0.8 0.25 0.1 1.0-2.0 0.2     0.05-0.2 0.05 0.15 RE
3.5 4343 4343 6.8-8.2 0.8 0.25 0.1 0.05 0.2       0.05 0.15 RE
3.6 4343A 4343A 6.8-8.2 0.6 0.1 0.1 0.02 0.1       0.05 0.15 RE
3.7 7072 7072 0.7 0.1 0.1 0.1 0.1 0.8-1.3       0.05 0.15 RE
3.8 4343+1%Zn 4343+1%Zn 9.0-11.0 0.8 0.25 0.1 0.05 0.7-1.3       0.05 0.15 RE
3.9 4045+1%Zn 4045+1%Zn 9.0-11.0 0.8 0.3 0.05 0.05 1.7-1.3       0.05 0.15 RE
4. Mechanical properties for some typical alloys 
No. Alloy number Thick.
(mm)		 Temper Yield Strength
Rp0.2(Mpa).
Min		 Tensile Strength
Rm (Mpa)		 Elongation
(%)
A50,Min		 Typical usage
4.1 3003 0.08-0.15 O 35 95-135 8 Fins
4.2 3003 0.16-0.35 O 35 95-135 10 Fins
4.3 3003 0.15-0.3 H12 90 120-175 0.5 Fins
4.4 3003 0.06-0.08 H14 125 145-185 0.5 Fins
4.5 3003 0.081-0.3 H14 125 145-200 0.5 Fins
4.6 3003 0.06-0.16 H16 160 165-205 0.5 Fins
4.7 3003 0.2-0.3 H24 125 145-205 6 Fins
4.8 3003-1 0.35-3.0 O 35 95-135 20 Plate
4.9 3003-1 0.40-3.0 H14 125 145-185 3 Plate
4.10 3003-1 1.0-3.0 H24 125 145-185 10 Plate
4.11 4343 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.12 4343 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.13 4045 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.14 4045 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.15 4104 0.07-3.0 O 35 95-150 8 Sheet for brazing
4.16 4104 0.07-3.0 H14 120 140-200 0.5 Sheet for brazing
4.17 3003 0.25-0.35 H24 130 155-205 6 Fins for air cooler
4.18 3003 0.1-0.2 H14 125 145-185 1 Fins
4.19 3003 0.1-0.3 O 35 95-135 10 Fins
4.20 3003 0.3-0.8 H14 125 145-185 2 Plate
4.21 3003 0.8-2.5 H14 125 145-185 4 Plate
4.22 3003 0.5-1.6 O 35 145-185 20 Plate
4.23 3003-1 0.3-1.8 O 35 95-135 20 Band
4.24 3003-1 0.5-4.0 O 35 95-135 25 Plate
5. Surface finish and other properties 
No. Item Description
5.1 Surface finish a. The material shall be free from pinholes and tearing; b.The material shall be free waves and buckles; c. The slit edges must be free from burrs and shall be straight and parallel.
5.2 Depth of Curvature In any length or width of 1 meter of the material,the depth of arc shall not exceed 2 mm.
6. Packing,Shipping and others 
No. Item Description
6.1 Packing To be packed in wooden boxes with card board and cutting with paper core in-between the coil max package weight 1500 kgs
6.2 Inner and outer diameter Inner diameter 100/150/200/250/300/400/500mm can be optional based on product spec. and quantity,max outer diameter shall not exceed 1700mm
6.3 Rolled core material Paper,aluminum,iron or none can be optional based on product specification or  requirements
6.4 Coil orientation Coil orientation in clockwise direction and eye to sky,anticloclwise can be optional
6.5 Packing way Horizontal or vertical packing can be optional based on product specification and transfer safety
6.6 Marking Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight
6.7 Shipping tools Ship goods by van to departune port then by sea to desitination port
6.8 Quantity variation ±10% variation with order quantity shall be acceptable

7. Brief of metal cladding material

        Metal clad material is a kind of material which combines different metals together with metallurgical bonding at the interface.Clad material greatly improves thermal expansion,strength,fracture toughness,impact toughness,abrasion resistance,electrical properties,magnetic properties and many other performances of single metal material. As a result, this material is widely used in petroleum,chemical,shipbuilding,metallurgy,mining,machinery manufacturing,electricity,water conservancy,trqansportation,environmental protection,pressure vessel manufacturing,food,brewing,pharmaceutical and other industry fields. Aluminum based multi-metal clad material is a clad material which clad aluminum,aluminum alloys with other metals. In theory,aluminum and aluminum alloy can be cladded with most metals.
        Typical applications for aluminum based multi-metal clad material
        Aluminum clad steell material
        The cladding of special steel and aluminum alloy combines the strength of steel and the excellent heat transfer performance of aluminum alloy, and makes brazing between steel and aluminum fins possible, which brings great changes to the design of the large cooling system. So this material is largely used in single-row type air-cooling condensers (ACC) for power station which is highly recommended by our government every year. The ACC system could save billions of tons of water for the whole country.
        Bushing Materials
        Babbitt (high tin alloy)-Steel clad material is excellent self-lubricated material, and is the important component of sliding bearing, which is necessary in the power system of cars,ships and machines.
        Aluminum clad stainless steel material
        The combination of stainless steel and aluminum alloy offers stainless steel better heat transfer performance and greatly reduces the material weight,at the same time,the corrosion resistance and strength is still good.This kind of material is a good material form manufacturing energy-saving cookers,and can dramatically reduce the weight of the vehicles when used for auto parts.
        Aluminum Clad copper material
        Copper is the best heat transfer and electric conductive material, and aluminum is second only to it. So the combination of the two can maintain good electrical conductivity and thermal conductivity meanwhile reducing weight and cost significantly.

Semi-Automatic Powder Fastening Tool

Semi-Automatic Powder Fastening Tool

Applications:

  • Widely used for concrete, metal, brickwork and rocky structures
  • Fastening of doors and windows, interior finishing and electric equipments

Technical Parameters:

  • Equipped with four power levels of (S1JL) powder loads
  • Equipped with nails less than 62mm

Features:

  • Automatic feeding
  • Various of applications
  • Adjustable powder-actuated fastening tool

Semi Automatic Powder Actuated Tool,Powder Fastening Tools,Power Actuated Fastener,Powder Nailer

Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com